Instructables

Step 6: Head and Hands

Picture of Head and Hands
554844_10151790476080268_839811961_n.jpg
556756_10151790475695268_1688192387_n.jpg
250706_10151790475045268_621163108_n.jpg
301721_10151790475455268_1144106963_n.jpg
522524_10151790474690268_1403277666_n.jpg
I had asked a very good friend of mine to make me a set of hands and a head for Dave, but i mustn't have given the right measurements, because despite them arriving and looking fantastic they were just too big and heavy to be used.

So To get me through Daves first event, Allen made me a head out of poly morph/ thermoplastic... that stuff is brilliant, to those who have never used it thermoplastic is an incredible plastic with a very low melting point... it can be molded into any shape and then put in a bit of hot water and re-molded... The first pic is head and hands mark 1, in the following pics you can see how it evolved once i got home and bout some thermoplastic to play round with for myself



 
Remove these adsRemove these ads by Signing Up