Introduction: My Short Sword/Mini Katana
This is my FIRST insrtuctable so it might be bad but give me any ideas PLZ. So this is my little sword thing I was REALY bored when i made it so that brings it here.
Step 1: The Pieces..
These are The Pieces you will need
4x Yellow rods
6x White rods
6x Little Green rods
4x Half-moon connectors
2x Snowflake connectors
1x Green connectors
1x Weird 2 spot connectors
8x Single connectors
4x Red rods
28x 180degeres connectors
4x red triangle connectors
Step 2: The Handle..
Now Make the Handle use 27 of the orange ones the 8 single gray ones and 4 red rods and follow the pics :) (make a box shape with the orange things and put the gray ones on top)
Step 3: The Hilt
Self explanatory....If you can't WoW ! but to put on ya um put it on the out side of the red rods but put it so its NOT HOOKED just so it can slide.....i'm sry it slides.
Step 4: The Blade...
Now for the blade!! ok now follow the pics and when done put the base of the blade connected to two opposite corners of the handle. (Its the ONLY way it goes on to it)
Step 5: DO'S AND DON'TS
1.Do mess around it is easy to repair!
2. Do Practice with it
3. Do mess with people (nicely :) )
1.Don't hurt people
2.Don't BREAK IT
3.Don't Break other items
4.Don't get your parents mad or other enforcing people
Ok that is about it have fun and remember cut don't slap the air cuz it will break!!!!! :( :( :( :(
We have a be nice policy.
Please be positive and constructive.