Picture of My version of a Table Saw
I needed to rip up a lot of timber for some roofing joists in my workshop. They were to be filleted into some plastic boards, so I needed to do them accurately. As a saw table would be around £90 minimum and probably wouldn't get used after the workshop was completed I decided to see what was on offer in Instructables. What I found was a number of excellent designs which used everyday workshop tools. As my workshop is still being built these weren't at my disposal. I have my trusty old B&D circular saw and decided to make a table out of laminate flooring. This medium is thin, so I won't need to router out a recess, I can just build the area around the saw plate up with further layers. It is very square and has a tough polished surface. I popped down to the local Homebase and found a pack that was damaged. The original price was £25 ($40) I got it for £13 ($20). An acceptable price for a temporary job. I also bought a NVR on/off switch as the saw trigger will have to be held open and under the table. The one I bought has a three pin plug in and out so no additional wiring is required. This cost £20 but will have many uses in my workshop.

So far I have used 1 pack of Laminated Flooring 
                                  1 tube of no more nails fast grip glue
                                  1 No Volt Release on/off switch
                                  1 unsuspecting pallet
                                  1 load of 2" and 3" screws
                                  450mm 20mm square box  mild steel
                                  3 m6 x 90mm carriage bolts, m6 nuts etc

ppetřík1 made it!1 year ago

Good idea - thanks for manual, I made myself :-) But I have some different fixing of the saw

2014-06-08 17.03.43.jpg2014-06-08 17.04.33.jpg
BiggJ3 years ago
Thanx a lot. This is what you inspired.
Table Saw.JPGTable Saw.JPG
aideym (author)  BiggJ3 years ago
This is great, well done. I am currently doing another one, this time for a saw fence
aideym (author) 3 years ago
I just want to thank everyone for commenting and to Instructables for the membership. Awesome.
I am looking forward to posting some of my other projects,
nanosec123 years ago
I think it would/could be a bit safer if your 'blade' cut out made room for the guard to come up when you are not cutting. Looks pretty dangerous without a useable guard.
aideym (author)  nanosec123 years ago
Yes I did consider trying to utilise the guard but it would either have meant butchering the guard or opening the slot to 25mm. As the wood needed to be 20mm thick on one of the cuts I worried that the wood may dig in and jam on the blade. Ultimately I used what I had as safely as I could but I do understand your concern
yoyology3 years ago
I need to do this in reverse. Can you post an instructable on how to convert a table saw into a handheld circular saw?

Just kidding! Great instructable. Love to see this kind of ingenuity mated with good sense and attention to detail.
pfred23 years ago
My version of this has a radial arm saw on the other side.
vincent75203 years ago
yes but how do you adjust the blade height ?…
aideym (author)  vincent75203 years ago
The saw has adjustable depth lever, which can be accessed by placing the table on its side.
feistydonut3 years ago
Man do I need to do this. Thanks for taking the time to post this.
embochner3 years ago
great work, very cool