Hi ,everybody !

(It's my first instructable , and appologizes for my poor english !!)

When i see this two instructables :

https://www.instructables.com/id/NES-Cartridge-External-Hard-Drive/

and

https://www.instructables.com/id/NES-Cartridge-25quot-Hard-drive-enclosure/

i want to do the same think !

First , i want to do this with the gold cartridge of Zelda , but it's was too expensive and when i mean it was a sacrilege !!

i have a Mario Bros/Duck Hunt , so i decide to use it.

I use also for my project a small hard disk (20go) and a USB - IDE cable adapter (4.62 $ at ebay seller "keyhere" ).

Step 1:

For the cartridge , i use a small tool to unscrew and open the box.

in the center of the box , i started to cut the hole for the screw whtih my smalls knifes and i use my dremell to make all flat as possible.

Step 2:

I use this cheaper USB - IDE cable adapter (4.62 $ at ebay seller "keyhere" ) , i open it and i desolder all the connectors (ide 44 pins for hdd 2.5 , ide 40 pins for hdd3.5 and sata).

I wire one by on , the usb adapter and the 44 pins connector , i use for this a old ruban cable for floppy drive.

To solder , i use this excredible solder paste (dealextreme, sku 4711 , only 3.57$) .

You put the wire in the paste and when you touch with the solder iron , you have à solder !

Step 3:

When all the wires are solder , i use my hot glue gun , to fix the wires in a steady position ,

I solder the mini usb , i use again the hot glue gun .

I cut a small piece of plastic , i screw a screw ( was shortened)for obstruct the middle hole (and also for the small detail ...) , i fix the plastic with the screw inside.

I put the original game ,

I put all in the nes box , i fix the mini usb by the hot glue gun (again and again!!)

Step 4:

I close the Nes cartridge and......

This is my Nes Cartridge External HDD !!!

And it's still playable !!

For the Nes icon , i made an .ico with znsoft icon maker , i create an .inf file with this inside :

[Autorun]
icon=2.ico (2 was the name of the icon)

i put the two on the root of the nes hdd .

That's all for my first instructable!

I hope you love it , and i thanks all of you to read me !

Bye , perhaps a another instructable .......