Print PDF
Favorite
Email
Step 7Ear Piece Placement
So the next problem to tackle was the ear piece. The C168 didn't have the ear piece attached directly to the phone, it was attached to the faceplate, and springs were used to make the connection.
So I measured and marked where the connections were going to be put so that it could still fit on the phone's circuit board, and I drilled holes for the sound. Thankfully, it still had some glue on the ear piece after I removed it, so I just stuck it on.
It seems like a simple, straight forward process, but it took about 30 minutes before it was done. The measuring, bit searching, and sticking was a time consuming process.
So I measured and marked where the connections were going to be put so that it could still fit on the phone's circuit board, and I drilled holes for the sound. Thankfully, it still had some glue on the ear piece after I removed it, so I just stuck it on.
It seems like a simple, straight forward process, but it took about 30 minutes before it was done. The measuring, bit searching, and sticking was a time consuming process.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
