Picture of NES Controller MP3 Player
So a while back I saw where someone had done a NES controller mod and turned it into a MP3 player. This is my version of this mod. Hope you like it.

BTW, I used a Coby 512MB MP3 player.

And check out www.straightrazorplace.com if you get a chance. Its a great place.

Here is a video of it playing with the speakers I made for it.

Step 1: Tools Needed...

O.K. if your gonna do this one you will need a few things.

Dremel or similar tool
Soldering Iron
Wire cutters
Needle nose pliers
Low heat glue gun
Spare wire, a few paper clips, wire ties...just the usual crap for improvising. LOL
1-40 of 314Next »

maybe one of the batteries from a old flip phone or something

and how long did your solder job last

gameguy15897 years ago
Sweet!! but what happens when the battery dies?

right! Maybe try a small rechargeable lithium battery or something. Looks like there is enough room

Then you open it up and change it, I think.
Where did you get your tactile switches?
I love your speakers to go with the player! I grew up during a time called "the 80's". Yeah, that's right, i grew up with the greats, sega, nes, tmnt.........I just gotta have one of these now.
Hey guys are all of the buttons rubber ?
gneferu4 years ago
Can u replace the usb for a mini usb? to reduce the opened areas.
zombeastly4 years ago
EPICCCCCCC!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! but wut mp3 did u use?
R.A.T.M4 years ago
i used a zen stone verry little soder points but its smaller but no i even used mortor wire and i still had troble with fitting it all in probly becuse i did not un soder the jack or mini usb but it works awsome carges and ya it kicks butt

i used a little 3 inch audio extenson  from raido shack and cut all the pastic off

and the green on the plastic is pollish
survive 090.jpgsurvive 088.jpgsurvive 089.jpg
wout smeets5 years ago
this is saving money you should not buy more switches
100_0519 nes bordje.JPG
why didn't he just use the original button plate? it would have saved a lot of glue...
Morte_Moya (author)  zack2474 years ago
With so many of the original plates being in crap shape I wanted it to be something anyone could do with just the case. That is why I did the separate buttons. I figured it would be more beginner friendly that way.
bilder1234 years ago
i bou an mp3 from dealextrem it has buttens rechargeble batteries and sd card slot do i stil fallo this instruction plz help im lost
killer776 years ago
it probably uses a cord to charge it like with an ipod
it uses a battery
InvaderDig5 years ago
So why hasn't anyone started making these and selling them on ebay? I'd buy one!
Wicky7777 years ago
Dose anyone know of a cheap mp3 player that works with iTunes and/or mac . I have had 2 iPods but my iPod mini's battery life is so bad and i don't want to wreck a $300 iPod video. Thx for the help.
Music purchased from the iTunes store will not work on non-iPod players. Music imported from CD's or illegally downloaded (not saying you should, I'm saying you probably do) will most likely be able to play on almost any mp3 player. Mp3 players play mp3s. Its that simple.
I get all my music off itunes thank you very much.
Pick one of the following dependent on what you meant by "thank you very much": a) You're welcome. b) You asked a question and I answered it. No need to get angry.
what about limewire ??
sorry for my late reply, torrents ftw. Coda.fm has albums.
o also buy also my music form iTunes, but i do it for the safety i'll get that it's gonna be at an standard bit rate, wich i can't assure form lamewire.
I just made one with an Ipod Shuffle, cost me 25 bucks off ebay
how u did the contacts? i was thinking about leaving the controller PCB and wire the shuffle to there (got a 521mb 1st gen Ol' shuffle lying round my home)
bantris5 years ago
Just an FYI, your zoomed-in portions of your picture do not line up with the actual picture.
KiW5 years ago
Nice, I'm trying it with a old SAGA 16 bit controler, but I run into a problem, there is no way I could get switchesm and I dont know what Ciken trys to say can you help me with a other way to do it? or explean Ciken's way? BTW NICE WORK!
TSC5 years ago
Sweet!!!!!!!!!! good job 5 stars!!!!!!!!!!!!!!!!1
upto5 years ago
from where u get this chip and how much cost of this circuit reply me....
yawgmoth15 years ago
Well, I'm working on one right now thats so far taken a few days. I've got most of the inspiration from you and ryan. However, I'm using a very different mp3 player (RCA) with an SD card and I plan on utilizing a solar charger for the internal battery. (bye bye garden light!) I'll post pics when I'm finished and let you all know how it went! Thanks guys for sharing these great ideas.
hi im building this but i need to know what swiches you used!!! please reply
therten6 years ago
what is a flux?
its to help the solder stick.
After seeing some of the NESC/mp3 mods other people had made, I decided to make my own. But there were some features that were missing that I wanted to add, namely a screen and replaceable batteries. The battery cover screws on/off. The original player called for 1 AAA battery, but I couldn't get it to fit in the case. So I read on this site that you could take apart a 9V battery to get 6 AAAA batteries, which were smaller. Two of these in parallel is about the same as a AAA, and fit nicer in the case. I also used a mini usb port instead of the standard size. I also included a belt clip on the back, and because I had some unused buttons: a small flashlight, and as a joke, a "Rumble Pak" (vibrator from an old cell phone). I've included pictures of the finished product, as well as 1 of the (cramped/messy) internals. Enjoy!

The player I used is an "Electro Brand" 2GB mp3 player (cheap Black Friday sale). And for anyone interested, this is the button layout:

Up/Down = Volume
Left/Right = Change track
Select = Menu
Start = Power/Play
B = Rumble
A = Light
NES 022.jpgNES 010.jpgNES 008.jpgNES 006.jpgNES 017.jpgNES 024.jpgNES 021.jpg
where did you get the
I hack sawed the clip off of an old book light that I had.
ihrtglfx106 years ago
Hey guys I just finished my ipod shuffle nes controller mp3 player, check it out here: http://www.instructables.com/id/NES-Controller-Shuffle-Nintendo-Controller-MP3-v/. Thanks Morte for the wicked idea!
corsi6 years ago
cool nes conversion and i made it all and it works but i have one question..... how would i go and use the origonal curcut bored and just connect the mp3 buttons to the nes controller buttons switch thingy?
taz9797 corsi6 years ago
go to ryan97128
1-40 of 314Next »