With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is an Instructable how to make the ultimate retro-gamer tool, the NES Controller USB Bottleopener.This is an option to play NES games on PC with ...
NES-controllerUSB Gamepad (I used a cheap one from Thrustmaster)Mini-USB ConnectorUSB Cable (Mini-USB Plug to USB Type-A Plug)Block of Aluminium (5x12...
To dismount the cases just use your screwdriver and remove the screws. Also remove the circuits and clean every piece of the NES controller (We had to...
When milling the NES Buckle you have to remark two things. First, the sideholes have to be at least as lenght as the belt an secondly you need a mecha...
On the backside we drilled the attachment mechanism and removed some plastic (have a look at the picture). Also on the frontside we had to remove some...
This is the most difficult part. Now you have to cut the boards. Now we map the old conducting paths up to the new controller.So you have to drill som...
Put anything together. Use some glue to fix the USB Connector and screw everything down.Now have fun at playing NES games and drinking beer ;) .
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »