The Nintendo Entertainment System rocked the world with 8-bit goodness when it first came out, but it has faded in use as the years have gone on. I got a ton of use out of my own, but now... not so much.
Even though I don't play retro games, I still love the old box and figured that it should be honored in some way. Thus a concrete version would be great since it could live on in my garden as stepping stones. That way it would still provide a path for me to enjoy,
Here's how to make them.
Even though I don't play retro games, I still love the old box and figured that it should be honored in some way. Thus a concrete version would be great since it could live on in my garden as stepping stones. That way it would still provide a path for me to enjoy,
Here's how to make them.
Remove these ads by
Signing UpStep 1: Prep the NES - part 1
All you need is the top half of the NES. Fortunately, it comes off easily with a Phillips-head screwdriver.
After you get the top off, you'll see a few plastic posts that stick out. Cut these off with a Dremel. You now have a top half that will lay flat.
Note: some people are shocked to see a NES console cut up. The machine still works and the top can be reattached if you want. But still, they sold over 60 million of these things and barely any are used these days. Relax.
After you get the top off, you'll see a few plastic posts that stick out. Cut these off with a Dremel. You now have a top half that will lay flat.
Note: some people are shocked to see a NES console cut up. The machine still works and the top can be reattached if you want. But still, they sold over 60 million of these things and barely any are used these days. Relax.
Visit Our Store »
Go Pro Today »
Though for the time and effort a better effect might just be to instead make similar molds for the SNES, N64, and Gamecube - perhaps even a Wii if a broken one can be found cheap enough.
I think progressing along the stepping stones would make for a nice idea, but I wouldn't like trying to stand on an N64 stepping stone if its icy; plus the wii and Gamecube would be really small too. I'd hate to hear someone broke a hip on one of these.
They might work ok in a rock garden or in crazy paving though, so long as the height of each of 'em of match up.
I didn't read anything about you adding any reinforcement bar,to this mix
Stepping stones, are usually made of Concrete, not cement.
cheers
As my post states, stepping stones are usually made from concrete.
cement is an adhesive. Adding even something, like chicken-wire, or coathanger wire, in the form will add a little bit of (reinforcement), sturdiness to plain concrete. :)
concrete: A heavy, rough building material made from a mixture of broken stone or gravel, sand, cement, and water, that can be spread or poured into molds and that forms a stonelike mass on hardening
thanks
As for me, my motivation was that the NES was a great size for a stepping stone. I was looking at molds at Home Depot and thought I should make my own instead. The NES popped up as an option right away.
After seeing the finished item, though, I really like the lines on it way more when it's monochromatic. It looks cool even if you don't know the source.
The monochromatic concrete with the linear textures is great, in a very pure American A&C style. They would not look out of place at all in any of the Craftsman bungalows off of Telegraph or Solano Ave. The fact that they derive from a mass-produced plastic electronics enclosure introduces some wonderfully ironic tension for those who recognize the design.
Wouldn't be easier, to build a wood mold for the cement,pour it in, wait until it's alomst stiff, then just press in the top of the NES ,into the cement, with mabye a layer of cellophane inbetween?
No need to take the Nes apart either.
cheers
Still, it's good to think about these things. :D
It all depends on how good of a finisher you are.
cheers
u r right, detail? I don't know, I don't have an NES to do this.