NES controller coffee table


Step 15: Glue it together

Picture of Glue it together
The base got glued together, then the drawer rails glued in place.

I then sanded it down to 240grit, gave it a good coat of sanding sealant, sanded it down to 400grit, and waxed.

I glued the drawer fronts in place with the drawer closed so I knew they'd fit just right.

Last of all I attached a "push to open" fixing to the rear of the draw - you push it in a mm or so and it pops open by itself, meaning there's no need for for handles on the front.
Remove these adsRemove these ads by Signing Up

Get More Out of Instructables

Already have an Account?


PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!