Print PDF
Favorite
Email
Step 2Preparing the case
Strip the DVD case of inserts and DVD, leaving just the plastic. You will need to print out the templates from here to provide the new insert and plans for the other parts. Be sure when you print these out you do not 'fit to page' or 'zoom/scale' the image - they need to be exactly the right size. You should check that what comes out of your printer hasn't been enlarged; the DVD insert should be exactly 184mm tall.
Cut down your new sleeve insert to replace the old one. You can find alternative designs here to download for different usages. When you insert your new cover you will find that the white 'eye' hole is positioned at just the right spot on the DVD case, telling you exactly where to cut.
Cut down your new sleeve insert to replace the old one. You can find alternative designs here to download for different usages. When you insert your new cover you will find that the white 'eye' hole is positioned at just the right spot on the DVD case, telling you exactly where to cut.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
