Introduction: Name Card Vibrobot

Picture of Name Card Vibrobot

We can make a vibrobot with a piece of name card.

Step 1: Preparing the Motor

Picture of Preparing the Motor

First, u need to prepare the vibrating motor. I would use a flat one and solder the end with pins.

Step 2: Cut the Name Card and Making the Battery Holder

Picture of Cut the Name Card and Making the Battery Holder

Step 3: Making the Body and Inserting the Motor

Picture of Making the Body and Inserting the Motor

Step 4: Finished the Core and Fine Tuning

Picture of Finished the Core and Fine Tuning

Step 5: Make Your Own Name Card Vibrobot

Picture of Make Your Own Name Card Vibrobot

To make the vibrobot looking more like beetle, I add a pair of legs and 2 pairs of wings.

You can draw it, paint it and design your own.

I also use chocolate paper package to make a colorful one.

You can also add a pair of LED "eyes" too.

Comments

Mr AbAk (author)2015-01-21

Wow!!Nice Ible ...

Kiteman (author)2014-03-19

Can you add a copy of the template you used?

kokpat (author)Kiteman2014-03-19

Sure, I had added the "template.jpg"

Kiteman (author)kokpat2014-03-19

Cool!

About This Instructable

2,605views

73favorites

More by kokpat:MeArm - Servo SupporterSimple PS4 Controller DockSmall Paper Lamp
Add instructable to: