Introduction: Nameplate With Glue
I have made a nameplate with glue
Step 1: Materials
The materials required are :
A piece of thick paper
An ohp sheet
Step 2: Apply Glue on the Paper
Apply glue over the paper evenly and put it on an ohp sheet. When it dries, remove the paper from the sheet. repeat this a few more times to get a better finish.
Step 3: Write the Letters
Once the glue is evenly spread on paper, make the letters with glue. When the letter dries, put another layer of glue on the letters. repeat this a few more times to make the letters bold.
Step 4: Painting
When the letters are made, start painting them. You should use acrylic paints for this.