Print PDF
Favorite
Email
Step 2Materials
You'll need:
Wood. Unless you have a table saw to cut wood lengthwise, your best bet will be to get 1" x 1" or 3/4" x 3/4" poles. You will need at least 30 inches of wood, but more likely around 50 inches if you want the ability to mulitply more numbers. The wood needs to be square.
Hardboard. Also called Masonite, you need a piece 10 inches high by approximately 4 inches. I got a 10 x 14 sheet and cut it in one direction.
Wood Glue, and a clamp to keep pressure while it dries.
Sharpie Markers. If you want a different look, you can use some other writing/painting instrument.
A saw (I used circular) and sandpaper.
Wood. Unless you have a table saw to cut wood lengthwise, your best bet will be to get 1" x 1" or 3/4" x 3/4" poles. You will need at least 30 inches of wood, but more likely around 50 inches if you want the ability to mulitply more numbers. The wood needs to be square.
Hardboard. Also called Masonite, you need a piece 10 inches high by approximately 4 inches. I got a 10 x 14 sheet and cut it in one direction.
Wood Glue, and a clamp to keep pressure while it dries.
Sharpie Markers. If you want a different look, you can use some other writing/painting instrument.
A saw (I used circular) and sandpaper.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
