Print PDF
Favorite
Email
Step 2Tools Needed
A drill. 1" drill bit. A Keyhole saw. That's all you need to modify the barrel.
To modify a gutter downspout, you will also need a heavy duty pair of scissors (or sheet metal snips), about 10 small sheet metal screws, and a small drill bit to pre-drill for the screws. A pop-rivetor would also work. The special pliers shown in the photo are for "shrinking" sheet metal. Optional.
To modify a gutter downspout, you will also need a heavy duty pair of scissors (or sheet metal snips), about 10 small sheet metal screws, and a small drill bit to pre-drill for the screws. A pop-rivetor would also work. The special pliers shown in the photo are for "shrinking" sheet metal. Optional.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
