Introduction: Need a Hand?

Picture of Need a Hand?

Hello everyone,

The goal of a project in our Design and Engineering course was to improve the classroom in some way. The first thing that came to mind was organization, as LEDs, resistors, etc. would get lost due to their size. We then decided to make a clamp-on box to contain materials while working. Here is the Instructable for the box; hope you enjoy!

Step 1: Materials

Picture of Materials
  • 3D Printer
  • Tool for measurement
  • STL File
  • Vacuum Form

Step 2: Measure Desk

Picture of Measure Desk

Measure the width of your desk in inches.

Step 3: Adjust STL File

Picture of Adjust STL File

On the STL File, adjust the space between the hands to exactly that of the width of your desk.

**Note: On the Tinkercad grid, make sure your units are in inches.

Step 4: 3-D Print

Picture of 3-D Print

Upload the STL File to a 3-D Printer and print the box.

Comments

tomatoskins (author)2016-05-31

This is such a fun idea! Thanks for sharing your project!

About This Instructable

59views

0favorites

License:

More by jshima:Need a Hand?
Add instructable to: