Introduction: Nerf Dart Modification

Picture of Nerf Dart Modification

This simple yet effective nerf dart modification will help with the lifetime of your darts and performance.

Step 1: Materials

Picture of Materials

You will need:

A nerf dart

A straw

A hot glue gun

And scissors or hobby knife

(Glue gun not pictured)

Step 2: Modification

Picture of Modification

Insert the straw into the dart then cut the straw to the length of the dart pull the straw out and add a bead of hot glue on the back and re insert the straw.( The glue is not necessary but will help , I did not do this because of the fact that my glue gun is in a box)

Step 3: The End

Now load up the darts and shoot e'm up tex!


jakobro (author)2015-05-06

will help with new darts but too late for others =(

mythbuster7 (author)2014-09-19

It keeps the darts straight while preventing the darts from bending

nerfrocketeer (author)2014-08-04

Nice MB7!

the ultimate smaug (author)2014-08-03

what does this do?

About This Instructable




More by mythbuster7:Nerf Dart Modification
Add instructable to: