Nerf Gun Modifications.

Nerf guns are not just for kids any more. In this how-to, you will learn how to make home made darts, modfy your nerf gun, and convert a watergun to shoot nerf darts. Mod a few guns, call up the friends, and shoot each other like your 10 again!

Step 1: Making Darts

This is the simple really. Materials are more the issue. You will need:

-Foam Backer Rod. Its found in a hardware store. It looks like the above. A big coil of foam. Try get 1/2"

- Fishing Weights. Ofcourse BB's, old nuts, anything that is small and has some weight to it will work.

-A glue gun and glue.

First, take the FBR and cut a small piece off. Use the glue gun to bore a hole in it. Now that you have a hole, drop your weight in it. Now alll you have to do is cover the hole with hot glue. Don't be afraid to lick your fingers and push the glue down for a better fit.

Repeat this for a good 50 darts and your in business.

Comments

[comando9000]

you said it!

[jmason16]

that.......is.........AWSOME! weird thing

[ghoru]

another way to get some extra kick, stretch the spring that forces the piston into the barrel or replace with a stronger spring. also by using the "buzzbee toys" darts (cheaper brand) they are slightly bigger and harder darts, force them into the barrel, cock the gun pull the trigger. the dart wont come out but a nice whack on the cocking mech and these darts hurt. i got hit in the mouth and had my gums split

[First Knight]

That's disgusting! What was under your gums?

[tifrankvl]

Sorry, but stretching the spring just weakens it.

[Wilne99]

you could also just cut the top off of a nerf bullet.....

[cioaonk]

Nerf Haven is like the Hardcore instuctables

[mechanic bullet]

what is the difference between CPVC and PVC pipe?

[salazam]

1/2 inch is too small for mine and 5/8 is too big. I've wrapped the ends of the 1/2 inch with a cloth tape, one time around, and it works but I have to find a good balance now maybe make the tips heavier because now they warble in flight.

[burning-ice]

What is your barrel?
1/2" cpvc works great for 1/2"fbr....

[salazam]

Maverick stock barrel are the primary weapons of choice, then they also work in the clip loading ones, but aren't as powerful. What I have is caulk-saver from the Home Depot and maybe that's why the circumference is insufficient.

[TheTicklemehellmo]

If your stefans spin during flight, you need to make it lighter, not heavier. #6 washers or metal .20 bbs are recommended.

[salazam]

I ended up using SP30 split shot. Seems to work, especially with the hot glue on the end. Still getting inferior distance than the regulars on the clip guns, but not the mavericks.

[TheTicklemehellmo]

For me, burning a hole at the bottom of a stefan with a hot glue gun seems to work. Also, making the stefan shorter than its' store bought counterpart seems t work better too, a recommended length is 1 1/2 to 2 inches.

[jumpingcat]

WAT MODDING GUNS IZ THE BEST PART say i if you agree

[HeckHawk]

Nice gun dude ! awesome !

[sonofstone]

are you sure about the 22 inch barrel? i just modded my supersoaker just by hotglueing on a nitefinder barrel, but the darts spin out of control, and the darts go anywhere except for the point i'm aiming at. i know thats because the barrel is too short, but isnt 10 inches long enough? thnx

[jamesalex55]

Do these darts hurt more than normal darts and where can you get backer rod in the UK?

[TheMadScientist]

cant find any record of a company referenced as K&G selling hobbyist metal products. closest i could find is a hobby specific company called K&S
http://www.oakridgehobbies.com/index.php/hobby-products-tools-paints-wood-metal-plastic-hobby-supplies/metals-tubing-strip-stock-sheets-rods-brass-aluminum
could original poster confirm/deny weather this is the brand he was referring to?

[sneakpeak123]

epic fail your cut is bad

[Innocentassassin]

ihave this old toy crossbow that i got for 10 bucks and i am tryin to make a bolt action airsoft gun out of it. get back to me if u can help. i has a groove down the middle that can fit the barrel from the extender of a longshot and i was going to try to use the same mechanism as the longshot but i dont no how to fit an airsift barrel on it......

[NerfModder1212]

does it matter how long the barrel is?

[VersatileHobbies]

barrel length matters for modded water guns i recommend a 22inch barrel

[weponary101]

the longer the more accurate u get

[SHADOW HUNTER ALPHA]

Yes. Extremely strong air-powered guns such as this will benefit most from barrels about 2 feet long. The barrel should also be a loose fit on your darts, but not loose enough that they can fall out on their own. Also, you may want to open the gun up and see if there is an "Over-Pressure Release Valve," what we in the Nerf Internet Community (NIC) abbreviate as "OPRV." An easy way to tell if a gun has one is to pump air and listen for a difference in tones in the later pumps. If there is a drastic difference, then there is an OPRV, which you can plug with hot glue or epoxy once you find it. They are usually located on the pump itself, and if not then somewhere nearby.

[nerfer192]

oh yeah? i have the internals of an at3k modded to be a 1pump yes i said one pump 60 foot super pistolthat gives welts and rips darts as thyer comin out the brrel that only sumtimes though but it makes my unweighted stefans wobble. SUCK!

[CapnTac]

Awesome! Un-weighted stefans? WTF? They have to be waited if you want them to be of any use.

[nerfer192]

yes i know my mom is anti bb gun so i don have bbs

[CapnTac]

Oh. You can use metal washers, too. They work pretty good.

[milsorgen]

 use small rocks

[Evilthingamabober]

I have no idea what you just said

[weponary101]

do you have a site where i can get step by step instructions on how to make this gun?

[nerfer192]

<a rel="nofollow" href="http://www.nerfhaven.com">click here, itl help.</a><br/>

[nerfer192]

whoops that comment was to mykaihlo

[ty.tdog]

could you please possibly post a video of this gun shooting??

[VersatileHobbies]

go on youttube and type SS Flash Flood Nerf gun and theres a vid of a guy shooting it it is'nt this guy but the gun was modded similarly

[deadpyro]

Would the kind of water gun that shoots water every pump work?Appreciated if you have an answer because i want to get into Nerf.

[VersatileHobbies]

any water gun that is a supersoaker product dat requires pumping and then puling the trigger will work cut of the nozzle and glue on a barrel or coupler =)

[geodez]

super soakers?

[nerfman44]

Uh ya i guesse it could my friend has the one you are talking about and it is a little bit worse then the other ones that you pump and then shoot. but it will work over all i helped my friend with that and he loves it. oh and the dude below my comment it will shoot water.