Introduction: Nerf Jolt Mod(Byte TH-1)

Picture of Nerf Jolt Mod(Byte TH-1)

Hello, I'm back again, this time with a Nerf mod that I named the Byte TH-1
(TH is my name abbreviated)

Step 1: NerfRocketeer's Rubber Band Mod

Picture of NerfRocketeer's Rubber Band Mod

Take 4 rubber bands and strap them from the top of the Jolt to the bottom.

Step 2: Cosmetic(optional)

Picture of Cosmetic(optional)

Take paint and a brush and brush over the parts of It that you want black.
You can use other paints as well.

Step 3: Internal Mod

You need to take the rubber bands off and unscrew the 4 screws on the bottom.
From there, you electrical or normal tape over the o-ring and then insert back in and screw in again.
The reason I needed so much instructions is cuz no pictures I don't feel like taking out the plunger again.

Step 4: Done!

Picture of Done!

There is my simple(simple without external mods that probably hardest part) nerf jolt mod! Hope you enjoyed, and keep on nerfing.


DIY Hacks and How Tos (author)2016-10-01

Nice. It is like adding a super strong spring to the plunger.

About This Instructable



Bio: I like to make knex guns, swords, and medieval artillery, I sometimes draw, play music, and Mod nerf guns.
More by tinyhooman:My Nerf Modulus LoadoutHow to Fix Old/broken/stepped on Nerf Darts.Knex Gun Guide 2016!
Add instructable to: