Picture of Nerf Maverick Barrel Mod
This mod allows the barrel of your nerf maverick to come out farther.

Step 1: Disassembly

Picture of Disassembly
DSC00928 copy.JPG
Take out the screws on the slide first. then pull it off. Then take all the screws out and pull your Maverick apart. You should see this.
1-40 of 105Next »
arshswag2 years ago
Great amazing mod
I have the rod and the spring attached, And everything looks perfect but when I pull the trigger there is a loud bang but no bullet gets shot. Im somewhat confused
jjone5382 years ago
Can u PLZ help me!!
I put my Maverick back together and the grey loading thing wont catch on and load properly. PLZ Tell me how to fix! @maxmaz2
ace12345m2 years ago
it's called the fall out mod not the barrel mod
firelord884 years ago
ok so this wrecked my gun some how, lol at first i thought maybe i had messed something up internally but i opened the thing up, as well as an unmodded one and they are both identical, i have no idea whats going on, but it sound like its skipping when i pull everything back, and i pull the trigger, it shoots forward but the gun doesn't fire the bullet i don know whats going on
I had that same problem. If you dismantle the gun again, near the top you should find a long and skinny little spring that has a loop at one end. Put the half of the cocking handle with the pin on it through the long hole and hook the loop onto the pin. When you reassemble it, it should work.
i have to put the other halve on to do it :(
there is a catch that goes around the spring and clicks in to place with the pump so that when you pull the trigger it closes the pump, there is a small bit of plastic on the catch that sometimes gets ground smooth. i'm not sure how to fix it but that might be your problem. hope that helped
replace the spring
Mr_Moosey3 years ago
I have extra pieces. there is a tiiiny spring, and a little plastic piece with a hole and four prongs on one side, and what looks like a clip on the other side. please help!
Ghostmaker3 years ago
What you're referring to as the "barrel" is the cylinder of the gun. The barrel is the orange piece the dart emerges from when fired.
xXSHORTYXx4 years ago
Did every thing but once I put it together I can pull back the top so I can't shoot ??? Help??
The slider has a thin rod in it. If you look inside near the top, there's a spring with a loop in it. Make sure the rod goes through that loop. Might help you.
that is what i did wrong the first time and then the barrel didnt rotate
zuko1234 years ago
yodaboyben4 years ago
hey i did this mod before but not with this tutorial, but it works perfectly fine! :)
ivolpe4 years ago
hey i have a question about this, my maverick is broken because of me tring this mod and now when i reload it makes a loud poping sound and dosen't fire. how do i fix it?
your back barrel might nnot be alligned. thers a similar mod but its to the revolving casing only same steps except instead of shaving the actual gun (the blue pic in step 3) u shave the barrel there
Who knew a small change to the frame would have such a neat effect?
Capt. Kidd4 years ago
it's called a cylinder. the barrel is the orange thing sticking out the front of your maverick. ya'know, the one the bullet travels through?
sub8934 years ago
I tried it out and it works well but I used a coping saw instead of a file.
pyro man6 years ago
all it does is go out farther?!!?!!? wow
sole pyro man4 years ago
Not just that, it also allows the barrel to spin freely for a safe game of russian roulette.
maxmaz2 (author)  pyro man6 years ago
hey its nothing big but its pretty cool
I think it is better.
maxmaz2 (author)  pyro man6 years ago
after the fact i took the barrel out fully
hdn_55 years ago
How did you take out the I dont know stick things inside each chamber of the barrel? Does it improve preformance?
it improves performance, but not much more than 10 feet. works great though! check this out, it's a removable turret: http://nerfhaven.com/forums/index.php?showtopic=83670
I know it improves performance, but how do you do it?
open up the gun like in the guide, then open up the cylinder thinggy, you have to pull out the metal rod which can be kind of hard. Then cut the sticks with a wire cutter or clippers or scissors or w/e and remove the plastic things on the tiny springs
tranoxx4 years ago
does the gun still work regularily?
maxmaz2 (author)  tranoxx4 years ago
Yep, 100%
heavydeath5 years ago
 wats the size of the tip of the barrel as i want to make a silencer anser quick
cleage0014 years ago
some call this the russian roulette mod
revtiedye5 years ago
I'm sorry to be so anal about this, but I was quite confused until I realized you what you were calling a barrel, is what I've always called the magazine.  I'm pretty sure the barrel is the long tube where the compression builds up behind the bullet. 
no that's called a piston or compression chamber. and a revolver wouldn't have a magazine, its a cylinder.
Ok, forget the word "Magazine."  Obviously I'm not a gun expert.  My point is that this instructible says it's modifying the "Barrel."  I drew a picture of a classic cowboy style six-shooter, and asked 10 people to point to the barrel of the gun.  All 10 pointed to the long tube at the front that the bullet comes out of.  Only one of them pointed to the cylinder, but then he said, "Normally I would have pointed to this (points to the barrel just like everybody else) but I thought it was a trick question."  Check out this diagram, or any other on the internet: 
I am asking whether, for clarity's sake, the author of this instructible should have used the word "Cylinder" everywhere he or she wrote "Barrel."
I agree. This is a cylinder mod, not a barrel mod. I too wish the author would change the description. When I read "allows barrel to come out more, I was thinking silencer...
1-40 of 105Next »