Nerf Maverick Barrel Mod

This mod allows the barrel of your nerf maverick to come out farther.

Step 1: Disassembly

Take out the screws on the slide first. then pull it off. Then take all the screws out and pull your Maverick apart. You should see this.

Comments

[arshswag]

Great amazing mod

[CanadianCraig]

I have the rod and the spring attached, And everything looks perfect but when I pull the trigger there is a loud bang but no bullet gets shot. Im somewhat confused

[jjone538]

Can u PLZ help me!!
I put my Maverick back together and the grey loading thing wont catch on and load properly. PLZ Tell me how to fix! @maxmaz2

[ace12345m]

it's called the fall out mod not the barrel mod

[firelord88]

ok so this wrecked my gun some how, lol at first i thought maybe i had messed something up internally but i opened the thing up, as well as an unmodded one and they are both identical, i have no idea whats going on, but it sound like its skipping when i pull everything back, and i pull the trigger, it shoots forward but the gun doesn't fire the bullet i don know whats going on

[ncc 1701]

there is a catch that goes around the spring and clicks in to place with the pump so that when you pull the trigger it closes the pump, there is a small bit of plastic on the catch that sometimes gets ground smooth. i'm not sure how to fix it but that might be your problem. hope that helped

[jaberwaukee]

replace the spring

[pbmillar12]

I had that same problem. If you dismantle the gun again, near the top you should find a long and skinny little spring that has a loop at one end. Put the half of the cocking handle with the pin on it through the long hole and hook the loop onto the pin. When you reassemble it, it should work.

[GASSYPOOTS]

i have to put the other halve on to do it :(

[Mr_Moosey]

I have extra pieces. there is a tiiiny spring, and a little plastic piece with a hole and four prongs on one side, and what looks like a clip on the other side. please help!

[Ghostmaker]

What you're referring to as the "barrel" is the cylinder of the gun. The barrel is the orange piece the dart emerges from when fired.

[xXSHORTYXx]

Did every thing but once I put it together I can pull back the top so I can't shoot ??? Help??

[janderson50]

The slider has a thin rod in it. If you look inside near the top, there's a spring with a loop in it. Make sure the rod goes through that loop. Might help you.

[mfrench2]

that is what i did wrong the first time and then the barrel didnt rotate

[zuko123]

THE BARREL IS THE LON THING

[yodaboyben]

hey i did this mod before but not with this tutorial, but it works perfectly fine! :)

[ivolpe]

hey i have a question about this, my maverick is broken because of me tring this mod and now when i reload it makes a loud poping sound and dosen't fire. how do i fix it?

[korgoth25]

your back barrel might nnot be alligned. thers a similar mod but its to the revolving casing only same steps except instead of shaving the actual gun (the blue pic in step 3) u shave the barrel there

[EngineerJakit]

Who knew a small change to the frame would have such a neat effect?

[Capt. Kidd]

it's called a cylinder. the barrel is the orange thing sticking out the front of your maverick. ya'know, the one the bullet travels through?

[sub893]

I tried it out and it works well but I used a coping saw instead of a file.

[pyro man]

all it does is go out farther?!!?!!? wow

[sole]

Not just that, it also allows the barrel to spin freely for a safe game of russian roulette.

[maxmaz2]

hey its nothing big but its pretty cool

[mg0930mg]

I think it is better.

[maxmaz2]

after the fact i took the barrel out fully

[hdn_5]

How did you take out the I dont know stick things inside each chamber of the barrel? Does it improve preformance?

[indestructibleguy]

it improves performance, but not much more than 10 feet. works great though! check this out, it's a removable turret: http://nerfhaven.com/forums/index.php?showtopic=83670

[pbmillar12]

I know it improves performance, but how do you do it?

[smash10101]

open up the gun like in the guide, then open up the cylinder thinggy, you have to pull out the metal rod which can be kind of hard. Then cut the sticks with a wire cutter or clippers or scissors or w/e and remove the plastic things on the tiny springs

[tranoxx]

does the gun still work regularily?

[maxmaz2]

Yep, 100%

[P.I. Kitty]

kinda hard 4 me
 

[P.I. Kitty]

(removed by author or community request)

[pbmillar12]

I used a steak knife to do mine... it worked to amazing effects

[heavydeath]

 wats the size of the tip of the barrel as i want to make a silencer anser quick

[pbmillar12]

idk

[cleage001]

some call this the russian roulette mod

[Air_Assassin]

ok?

[revtiedye]

I'm sorry to be so anal about this, but I was quite confused until I realized you what you were calling a barrel, is what I've always called the magazine.  I'm pretty sure the barrel is the long tube where the compression builds up behind the bullet.