Remove these ads by
Flag this comment as:
Not NiceInappropriateSpam
3 Simple Ways to Share What You Make
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Create on the go:
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
A series of videos showing how to modify your Nerf Maverick blaster in various ways including assembly, disassembly, laser sight, penny mod, russian r...
Runs you through the processing of pulling the Maverick apart in preparation for some modding. Just make sure you keep an eye on all the parts as so...
If you're going to pull the Maverick apart, you better know how to put it back together. There's a couple of things to look out for but it's an easy...
This tutorial shows how to install a laser sight using a laser pointer, AAA batteries with holder, wire and a switch. This is the most difficult of ...
The penny mod involves adding a few coins behind the spring to increase your firepower. Although it's called the penny mod, a variety of coins will ...
This mod allows the cylinder of the Maverick to release further from the gun so you can load it easier and spin the cylinder 'russian roulette' styl...
Air restrictors are installed in the Maverick to limit the range. This guide shows how to disassemble the cylinder and remove these restrictors. ...
There's a clutch in the rotation assembly that will slip when too much resistance is met. This protects the internal parts and makes the Maverick more...
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »