Ok now this instructable I will show you how to make your nerf gun look cooler. I'm enter this in to the usb contest so please vote for it!!!! If you like what I build please subscribe to me!!!!

Step 1: Things You Need!

Stuff you need:
Broken electronics (you will need at least one broken flash drive)
Hot glue gun,(with glue sticks)
Some thing that will cut,
A nerf gun,

Step 2: OK!

OK! now take apart your broken electronic all you need is the circuit board.

Step 3: Glue

Now glue The flash dive on your nerf gun by the nerf bullet holder.

Step 4: Just

Just glue your electronics were they bast fit cause I do not think we will have the same electronics.

Step 5: Nerf Bullets

OK now take off the black stuff at the end of the nerf bullet and put hot glue in the hole make sure that it is compete cover so, no air comes through it.

Step 6: The Trigger

Ok, now trace the hole size of were the trigger hole is on to the circuit and cut out the hole, repeat this step with a other circuit board.Look at the picture and notes.And glue it over the trigger spot.