Instructables
Picture of Nerf grenade launcher (homemade)
Ammo
3 foam balls (only shoots 2)
or
3 velcro darts

Ranges 5-10 feet
1-40 of 46Next »
otmpp1 year ago
how do you make it
ewak2 years ago
what are the material?

Attmos2 years ago
nice, i like it.
S P A R T A2 years ago
I just recently built something similar to this. My Nightfinder broke after a failed mod, so I took the plunger tube (I think it's called, just that orange tube with the spring in it) from the Nightfinder with the full plunger assembly, and sawed off everything other than the handle past the front of the huge circle with the Nerf logo on it. The plunger assembly goes into it, and there is a small rectangle there, just glue the plunger tube to the end of the Nightfinder, pull the cocking mechanism, it should lock, then press that button. Watch your fingers, I learned that the hard way. I can fit 3-4 darts in, but it doesn't go as far as 2 darts.
Make an "ible for this launcher please! I've been looking for an underbarrel launcher "ible".
look up Meanbean's Nerf grenade launcher and make one. To put onto the barrel, you should get some PVC pipe and cut it to just the right size, then, take that scope you get with the recon, and take out the innards. You should get the rail piece. Hot glue the PVC pipe to that.
One day nerf is gonna start making the next M4 for our military. And it going to look FREAKIN AWSOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
but, the M4 will be bright yellow and the enemies will alwas be able to see our troops. and they'll shoot darts instead of bullets. LOL!
kve23 V1nz0rd3 years ago
poison darts >=)
Royse98083 years ago
that's awsome but how does it shot?
aseaheru4 years ago
1, HOW DID YOU MOD THAT LONGSHOT!!!!!!!!!!!!!!!!!!!!!!!!! 2, how do you make this 3, co2/ better spring? am gessing uses spring
maxxxem (author)  aseaheru4 years ago
Actually I'm thinking about making a GL for my + bow using Titan internals.

Modding my LS? I still have it. What would you like to know?

Ar removal, AR15 spring addition, fixed stock (half way) and paint.
Also I tried to Internally silence it. drilled holes in the barrel and surrounded with cotton.

http://maxxxem.webs.com/
mag+site
maxxxem (author)  aseaheru4 years ago
The mag is just two LS magazines e-taped.
That holo site is a LS scope clip that hooks onto the rail, a small Bike tire pair kit box and a cut piece of a dental floss container. Dosen't realy function.
Acitualy Reciently I have painted blue tiger stripes on the LS
           ____
 ____/          |                                                             
|________ |                     
win
sweet. merf now makes clips that you can attach 2 mags to.
maxxxem (author)  aseaheru4 years ago
Yea i have one, the mags just fall when your running..=(
glue between clips and clip clip
....
pretty sure you should just duct tape the clips together.
makes sence, but take falls apart and plastic cement holds together
maybe, but even if it does, you can just re- tape tape it. I keep a spare roll of duct tape in my bag for emergencies.
ok, i can see that
ack
EVERY THING! fore my #1 ...??????
Trizixx4 years ago
this is really good, i'm suprized that people have'nt thought of this before.
meanbean5 years ago
5 to 10 feet? really, you could throw those balls farther than that. Get it to at least 20 feet using spring mods, and a new o ring, then cram like 5 in there. now THAt would work.
1129ag5 years ago
how did you make that
Colonel885 years ago
ehh it doesn't look like it has "mad" range, consider modding a Atom blaster into it instead of a nitefinder since atom is MEANT for shooting those little balls
maxxxem (author)  Colonel885 years ago
yea
beastie215 years ago
how do u make it???
Nerf S.A.S.5 years ago
put up an instructable for this
Geoff 1175 years ago
Can you make an instructable showing how to make a longshot like yours?
maxxxem (author)  Geoff 1175 years ago
maby
emuostrich5 years ago
Looks aren't all. And judging from the 1(one) picture you most generously gave us, I don't see much point in making it. If you can get an astounding 5-10 feet out of it, just go take a nickel and by yourself a Reactor. And if you care about putting the hurt on, just buy a BBBB (Buzz Bee Big Blast), do a barrel replacement, and make some stefans. Oh, and if you're going to make a double clip, couldn't you just take the time and effort to make one that doesn't require you to take it out and flip it? CS's 12-dart LS clip: http://nerfhaven.com/forums/index.php?showtopic=8071 And this is to everyone (not just you...) If you have the time to glue two LongShot clips together, you have the time to join my site at http://www.theinnercore.webs.com, and especially if you used epoxy. Remember, join now or you won't get the valuable incentive. And by "now" I mean NOW.
maxxxem (author)  emuostrich5 years ago
toogers5 years ago
hmmmm..... nice but it looks kinda flimsy, like i'ts gonna explode from the pressure of the spring.
maxxxem (author)  toogers5 years ago
the frame is NOT flimsly it looks bent because the ram head is not teh same size fo the barrle i fixed that
make a instructable
serouisly think about making an instructsble
wow thats neet! how does it attac to the gun?
maxxxem (author)  knexsuperbuilderfreak5 years ago
it has a clamp, just like a scope ring
1-40 of 46Next »