With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
modify a nite finder nerf gun so you can hold the lite on with out accidentially firing.
You need a drill or remer, a momentary switch, a nite finder nerf gun, a screw driver, some wire, adn a soldering iron(i just twisted the wires cause ...
Unscrew the case, make sure you dont lose the screws
Cut the wires to the old switch. solder or twist new wires long enough to reach placement of new switch.
Drill or ream a new hole for the momentary switch. placement doesnt matter as long as it fits.
Insert the switch into the hole and put the bolt over the top to lock it in place. Then wire the light to the switch
Screw on the cover and you are done
Simple Nite Finder Modby kittymeow
How to Modify a Nerf Nite Finder With Rubberbandsby rockzter928Gaming.
Simple Nerf Firestrike Modby nerfrocketeer
How to Make a Two Dart Speedloader for your Nerf Gunsby Pizzapie500
Nerf Gun Modifications.by barnes
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.