Nerf nightfinder bb gun

This instructable will tell how to make a bb gun out of the nightfinder.

Step 1:

You have to remove the air restrictor and add lots of rubber bands.

Comments

[vertex21]

Make the barrel longer to improve accuracy this will unfortunately takeoff a bit of power

[mlking21]

 he already said that this gun had lots of power, so I think it wouldn't really matter but it will be hard to make a straight barrel (if you know what I mean). A fact about the power: I don't think you need so much power that you can go down the street shotting people down =P.

[daggerofblood1243]

Shotting poeple down?????!!!????

[viraj_13]

 can i use a pen... like this part anyway..

[35Timmy]

why yes i am not sure about this kind of nerf gun thou however you do not need the cap what i do is i remove the straw of the nerf gun and put in a pen tube then you can insert a bb and you can poke in it with a ink all thou somone times you have to untape it a poke it out with an ink tube and even more rare sometimes you have you etrher pull out the bb or cut the bb out if you cannot press it out also be carefull i am not reponsible for what you do with this i have my own repononsiblitys now the only problum with that is you have to open up the nerf gun you can also use other brands PLEASE FOLLOW THE COPYRIGHT GUIDELINES

[35Timmy]

why yes i am not sure about this kind of nerf gun thou however you do not need the cap what i do is i remove the straw of the nerf gun and put in a pen tube then you can insert a bb and you can poke in it with a ink all thou somone times you have to untape it a poke it out with an ink tube and even more rare sometimes you have you etrher pull out the bb or cut the bb out if you cannot press it out also be carefull i am not reponsible for what you do with this i have my own repononsiblitys

[viraj_13]

 only the white part

[35Timmy]

well the pen tube will be the air gun barrel but i advise you use the ink tube to stick in the bbs

[strcrusher]

ya you can use that
but put lots of tape on the back so it fits

 

[35Timmy]

yeah use tape so it secure also you do not need the spring unless you go into replacing a spring whitch you can lookup on instructables search bar

[BADWOLF1]

where do the bbs shoot out of the gun

[soldeir 9]

at the back so it shoots u in the face lol jk

[firefighter1333]

i think out of the front ×D

[viraj_13]

 can't you think of anything else

opinion thats mostly true--- I dont think that a lot of people have lego pillars

[dombeef]

A pen barrel
I used that before it was taken away...

[ThaAWESOMEducttapeguy]

u dont rly need th rubber bands, its powerful enuf alrdy

[ThaAWESOMEducttapeguy]

HoW dO yOu RemOve thE aIr ReStrIctOr???????

[akak1559]

how do u remove the air restrictor?

[charlie.nourse]

Try using a bic pen body instead of a lego pillar.

[legomaster50]

whats a lego pillar?

[Jugglebug]

For accuracy lengthen the barrel with a piece of 1/2" inch pvc- or alternatively change the way you make the barrel smaller and use a pvc size appropriate for the bb's you are going to use.

[hikarusant]

whats a lego pillar?

[hikarusant]

The air restrictor or what i think is the long cross piece in the middle when you open the tube that shoots the dart.

[footbagboi]

okay bajamini, no offense, but this gun sucks. the bullet just falls out of the barrel

[Zaphod Beeblebrox]

I did this with more rubber bands and an airsoft barrel and it was insane!!!!!!!!!!!!!!!

[footbagboi]

haha well good for you

[li789]

where are the are the air restricters exactly

[bigskinsfanj]

No offense but this gun sux it wont even go anywhere it just falls out of the barrel and then my friend ate the gun sooooooooo yeah