Network Cards Notebook

This is an easy one, but all your geeky friends will want it.

You need:
- two network cards (or something similar, a circuit board with a regular size)
- paper (the easy way is to cut an old notebook)
- a spiral (same as before)

Step 1: "Clean" the Cards

First, dismantle all of the old cards, leaving only the printed circuit, and maybe the processor.

You can use a soldering iron for it.

Updated: In fact, I used the pliers, it's quicker.

Step 2: Cutting and Piercing

At this step we are going to pierce the circuits to permit the spiral can go in its place.

Step 3: Finish!

Now assemble the circuits and paper with the spiral, and you will get it.