Picture of  AdamsDead's shotgun mods
If you have built Adamsdead shotgun ( if not click here for the instructable ) you will have noticed that the hopper is really, really , really bad. It jams takes way to long to load and breaks. But In this instructable I will teach you how to build a new better non- jamming hopper. Special thanks to Hack124x768 for the base model of the hopper.

Scope, Pump, Bigger hopper and some other stuff now added!!

Check it out!

The people who made this are jackster57, dsman1, and adamsdead is in the collaboration.

If you have any mods PM me and show me them. If there good enough ill add you to the collaboration to post it.
Remove these adsRemove these ads by Signing Up

Step 1: The Piece List

Picture of The Piece List
To build the hopper you will need the pieces in the pic below and also the shotgun with the hopper removed.

Step 2: The the first part of the hopper.

Picture of The the first part of the hopper.
This part of the hopper holds the swingable arms of the hopper that let it open and close.

Pic #1-#5 just follow the pictures...

Step 3: The 2 swingable arms

Picture of The 2 swingable arms
This hopper is for both lefties and righties so it opens from both sides. Just make both swingable arms from the pics.

Step 4: Attaching to the Gun and Filling it up.

This is how to attach the hopper to the gun and how to fill it up.To fire it just pump it then pull the trigger.

#1= a look at where to attach it.

#2= a pic of the hopper attached.

#3 The hopper attached and closed. ( to close it just push it inward till it snaps in.

#4 The Ammo

#5 The hopper open and loaded.

#6 The hopper closed and loaded.

#7 The finished gun.

Step 5: Scope

Picture of scope
look at the pics. should not be to hard. also please note the the two blue connectors are turned opposite ways and are only held in by pressure.

Step 6: 20 round hopper.

this is the 20 round hopper.

Step 7: Ataching the 20 round hopper. and loading

Picture of ataching the 20 round hopper. and loading
this should be easy

Step 8: Pump

Picture of pump
the new pump.

Step 9: Random mods.

Picture of random mods.
just random mod to make the gun better.
dsman1952767 years ago
i cant get mine to work
jackster57 (author)  dsman1952767 years ago
Yeha Srry I made a mod when I collaborate for u ill add in the barrel mod. =D
do you want my to post my hopper?
ahh. first pic disipared.
Furloy5 years ago
love the big ger hoppeer
yerjoking7 years ago
for the hopper, for the like 14 other rgey one slot connectors, instead can i use orange connectors aswell?
jackster57 (author)  yerjoking7 years ago
Nope. Orange connectors are slightly bigger so the rods will not fit into the breach
what breach?
I like the mods, 5*
juneapaluna6 years ago
What new barrel are you talking about?
the one thats new
Wafflicious6 years ago
pump mod makes it worse lol
c11man6 years ago
i havecreated some more better mods and thes are at
c11man c11man6 years ago
Fresh947 years ago
Did you notice that this gun has NO exotic pieces. The trigger system was hard but im awesome. >.<
jackster57 (author)  Fresh947 years ago
Yeha Its a great instrucatable and a great gun
Thx man. (Btw its my first knex gun instructable.)
i made it and its the best gun ive made yet
Kaiven7 years ago
that is NOT new. it was modded from the osnjckma2
jackster57 (author)  Kaiven7 years ago
I know i said special thanks to Hack124x768 for the base model.... if u read it you would have seen it...
i saw that im just saying that even the whole gun is based off of his
i know... if YOU read, you would see that i said you MODDED it...
True, but it's still cool, haha.
flames103917 years ago
lol adamsdead's shotgun uses lots of the osnjckma2's features, and your hopper is quite similar to the osnjckma2's. i just find that funny
dsman1952767 years ago
sorry my hopper holds around 20 and never jams. but good job. i tried this on mine before i made the hopper i have now. mine was horibal good job.
thebboy7 years ago
when i first saw this i thought it was talking about adamsdead's rifle, wich i had been waiting for a hopper on.