Instructables

NiCd - NiMH PC Based Smart Charger - Discharger

Step 3: Preparing the PCB

Picture of Preparing the PCB
For the fast charge process you will need a high current , in this case you should use a heat sink, i have used a fan with its heat sink from an old VEGA card. it worked perfectly. the circuit can handle currents up to 3A.

- I fixed fan module to the PCB.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!