Instructables

Nifty and useful Dental care and Well-being kit

 DISCLAIMER: This kit is similar to some others on Instructables.com with which you may be familiar. The contents and construction was my own idea. If you think I copied yours, then I had no idea that I was doing so.
 I do not wish to say the brand name of tin I used, but perhaps the second picture below will give you a clue.                                                                                                                                     /\
                                                                                 |

Step 1: Step 1: Stuff you need...

You will require:
 A metal hinged breath-mint tin
 A cheap toothbrush
 A small roll of dental floss
 A tiny tube of toothpaste
 A gauze pad
 Two flossers
 Two bandages

Step 2: Step 2: Trim toothbrush to size

Picture of Step 2: Trim toothbrush to size
100_0329.jpg
Using a hacksaw, cut 3" down from the toothbrush head.
It should look like the picture below.

Step 3: Bandages

Picture of Bandages
Place both bandages in the tin as shown.

Step 4: Gauze pad

Picture of Gauze pad
100_0333.jpg
Fold the gauze pad in half and place as shown.

Step 5: Flossers

Picture of Flossers
Place both flossers on the gauze pad as shown.

Step 6: Toothpaste

Picture of Toothpaste
Place as shown.

Step 7: Toothbrush

Picture of Toothbrush
Ditto.

Step 8: Dental floss

Picture of Dental floss
100_0340.jpg
100_0344.jpg
100_0345.jpg
100_0345.jpg
Pop open the Dental floss container so that it comes in two. Remove the spool of Dental floss and place in kit as shown.

Step 9: Apply artwork and finished!

Picture of Apply artwork and finished!
100_0350.jpg
100_0367.jpg
You can now cut and paste on any decorations you desire onto the lid of the tin. Let the glue dry, and you are finished! congratulations! (Now go camping and try it.) ;)
 Please vote!
 
Remove these adsRemove these ads by Signing Up