Instructables
Picture of Night Bike!
Gas is too expensive and not ecofriendly, so I like to bike wherever I can... unfortunately that means a lot of biking back from work at night.  This always makes me a little nervous, how much can you trust drivers going 45 miles per hour right past you?  I mean, a little dinky bike light can only do so much.

After too many close calls to count, and a lot of weekend tv watching I was inspired by the Blackberry commercial,  As you can see, they had much more than a small flashing bike light to keep them safe, and those bikes certainly had some flair!  

After doing a little bit of research, I found that there were some super glow in the dark paint, better than your typical craft store stuff.  In fact it's called phosphorescent paint which can glow for up to 12 hours, is substantially brighter than simple glow in the dark paint, and only takes 10 minutes to charge up!  

I must say, after creating this bike I feel much safer riding in the dark, cars are able to spot me from quite a far distance.  I've even gotten a few compliments on the cool style of the bike! Safety and style... it's a win win!

So thus begins my instructable - a glowing bike that will not only amaze friends and onlookers, but be extremely safe for riding in the dark.    

UPDATED INFORMATION and TIPS and RESPONSES TO COMMON QUESTIONS:
- I bought my paint at glonation and it worked fairly well.  A better choice (for brighter glow) may be gloinc as they advertise their paint is 3x brighter than their competitors.  However, it is pricier than glonation.  You could also do a little google search on super phosphorescent paint and you will find a few other places to purchase the paint.  You can't buy it in a typical craft store (at least to my knowledge).

-The paint is NOT radioactive... so you don't have to worry about that

-We used 8 ounces total, 4 for the frame and 4 for the wheels.  We had to put on many layers since it is hard to get even coverage with a paintbrush.  There is not a spray glow phosphorescent paint on the market yet, it is being developed soon hopefully.  The paint is creamy, so doesn't really work for an airbrush.  

-Be careful when you purchase the paint and READ the advertising.  For instance from glonation it states that orange only glows for 15minutes while is says that green (though dims) glows for 12 hours.  Gloinc states that their green glows for 24hours, gloinc also has some information on the brightness on each glow.

-See last page of this instructable for some really cool black light LED's that would fit on the bike inconspicuously and give it an even brighter and longer glow!





 
Remove these adsRemove these ads by Signing Up
1-40 of 192Next »
DurgaP112 days ago

hello friends i want change my byke look in to tron byke look... which type of paint is better for this remodeling... pls suggest me.........

I think it would be cool to have a bike that was both glow in the dark and reflective. I know there is reflective paint. Any idea if you can paint your bike with both of these paints and if so how to do it???

This actually makes a lot of sense; especially in terms of the glow in the dark paint. The reason white works best as a base coat is because it reflects more light, allowing it to activate the glow in the dark paint more. Therefore I think it would be pretty interesting to use a base coat of some time of reflective paint with the glow in the dark paint on top of it. The only problem is I'm not sure how much it would show through the glow in the dark paint. I guess you could always leave a stripe or pattern that isn't topped off with the glow in the dark paint, perhaps even in an interesting design/pattern. Just my two cents.

We are working on Several Dual Technology Products (Retro-Reflective and Glow in the Dark) and will be posing them as they become available. This Dual Technology provides the Best of both worlds. allureglowusa.com
Adobi (author)  WildHoneyGloria2 years ago
That sounds like a good idea... I am not sure if you can do it. But if you try it let me know how it works!
DarksideScott10 months ago
or you could just have LumiLor Labs light it with LumiLor. EL paint...http://lumilor.com/
aturner261 year ago
I want to know if the paint from Glowinc website is suitable in rainy conditions will it make paint come off ??
can I use a normal paintbrush to apply paint and what paint should I use paint my bike white ??
You should enter the bikes and wheels contest they have on the app
Ryanj20001 year ago
I love it but the only downside is before you ride you have to have lights around it.
Does anyone know how i can buy the paint on the website???
asktom2 years ago
Just did a new bike, "White" painted it w/glopaint, the good stuff (3-4 coats). Looks like glue and streaks of green from glow, glows great "But" you can see brush strokes at night when close..Also, goes on rough like sandpaper...

I guess I should have used a spray gun, "Will it change the consistency and NOT be so rough, white looks white but up close you can see the glue type consistency and little green color as mentioned..

Anyone done one with a spray gun, does it come out better?


Glo Nation's FAQ says to mix 1 oz. of glow powder to 4 oz. of clear coat for a clean spray application. That's probably what I'll do. Also here's a more in depth instructions on how to spray glow
Cool! me too! I'd like to know if anyone did it with a spray gun as well...
my fixe bike is an obnoxious florescent highlighter green color and i was wondering weather i can keep the color without having it all white and still have it glow (obviously green) in the dark. is this possible ?
Adobi (author)  the mastereggroll2 years ago
Yes, you could keep the bike a neon green. However, the glow paint won't glow as brightly as if it had a white background. Also the glow paint has a slight tinge of color so it might clash with the neon green you already have. Plus the flat white spray paint helps give the glow paint something to stick on. These are just some things worth considering, hope it helps!
oh okay then thank you!
OCLVig2 years ago
I'll have to do this for my mountain bike night rides! I'll just "activate" it with a handheld blacklight before hitting the trail. even though I run a 32 watt light system on the bike, it is still black as pitch from the handlebars back. The light only lights the trail in front of the bike. I'm sure the glow effect will still be quite noticeable for the other riders.
I just did a bike too! Like ask tom... mine turned out great! It is super cool. I tried to take a picture of mine to post.... but it did not look nearly as good from the camera view as it did in person. And it did glow like 4 hours for me... not that I bike that long anyway.

So glad you posted this instructable! Congrats on winning... you deserve it!
what glow paint did you use?
jolshefsky2 years ago
I bought the Water-Based Glow in the Dark Paint Sample Pack from Glow Inc. and got a chance to test it. I left the bottles clear-side-up in a sunny window for a couple hours then moved them to a darkened room. The glow was about as bright as I remember from hobby-store glow-in-the-dark stuff. Compared to a glow-in-the-dark T-shirt, the green is, in fact, considerably brighter (describing the perceptive difference, I'd say between 5 and 10 times brighter, but still only comparable to the light observed looking at a 20mA 50mcd green frosted LED).

I expected them to last more than several hours, but when I checked them after 30 minutes, all of them were barely visibly glowing. I bought the sampler so I could try different backgrounds and different clear coatings. I'll still do those experiments, but so far I'm very disappointed.
I would suggest checking out our Product Disclosure Statement on our website at allureglowusa.com. This will explain how to properly test a product and some of the things that will effect the Glow.
You want to use a White Background or Primer and after the Glow Paint has cured put a High Gloss Clear over the top. Note: Make sure that the Clear Top Coat does not have any UV Inhibitors in it or you will not get any light through to the pigment. The clear top coat will increase your glow by as much as 15%.
I completed some testing and could not replicate anything close to the glow times indicated by Glow Inc. I would not recommend their products.

I doubt Glow Nation's paints are substantially different. I am suspicious of the hours-long glow times stated in the Instructable, and of the strange EXIF data noted by yardleydobon in another comment.
A whole frame is tuff to manage , best case scenario buying a 12 volt lithium ion battery pack and setting UV led spots strategically set on the frame maintaining the glow factor on, better go for del strip, much more spectacular , nowadays a sufficient li ion chipped rechargeable pack's bought online for around 40 bucks and stored in the saddle bag can keep WProof led strips lighted for 4 to 8 hours glow rims are easyer to maintain aesthetically wise by modifying bike lights with UV led's and setting them on the fork lighting both sides of the rims .
PS does Phosphorescent pink glow as long as the jade green one ?
2 Questions. 1) Won't the bike pickup light from street lights and recharge the paint during your night ride? I also believe that if you ride it in the daytime it will charge with sun light.

2) If you use the black lights, What size battery do you need to turn them on, 6 volt 12 volt, portable batteries?

P.S. If you used a headlight and pointed it to the bike frame that light should recharge your paint as well. Does it?

Thanks for your great project.
To answer your question yes street lights or headlights will charge the Photoluminescent or Glow Pigments in the Paint. I wold suggest checking out our Product Disclosure Statement on our website at allureglwusa.com. This will explain how to properly test a product and some of the things that will effect the Glow. allureglowusa.com
ptag2 years ago
Do you think it is possible to paint the bike black for the base color and then put the glow in the dark paint on that with a matte finish and the glow would still work at night?
Allureglow ptag2 years ago
If you use Black as your base, you will loose up to 50% of your Glow Intensity. We have tested every color available including chrome, brass, reflective and many more only to find that White is the best. Allureglowusa.com
Adobi (author)  ptag2 years ago
I am not sure, but I think the white background has a better chance of success glowing. The black might take away from the ability of the paint to reflect, or it might dull it. You could try it on a piece of wood first to test it out.
sanchez052 years ago
can you charge it with sun light?
Yes, Photoluminescent or Glow in the Dark Products can be charged by any type of light, but the sun works the best. Our Allureglow Products require only 10 minutes in the sun to be fully charged and glow in excess of 12 Hours.
allureglowusa.com
Does the glowing effect wear out in time? Does the bike still have the same glowing power now that it did when you built it?
Although there are many Glow in the Dark Products on the Market you have to know which type of Photoluminescent Pigment (Glow in the Dark) was used. Many of the Paints and Inks on the market use a Zinc Sulfide Type which is not suitable for Outdoor Use. Allureglow offers the Highest Glowing Paints, Inks and Coatings utilizing the most advanced Strontium Aluminate Technology. Allureglow Pigments show less then a 8% degradation over a 20 Year duration.These paints can be sprayed using an HVLP System, or Air Brush. Check them out at Allureglowusa.com
or_ford982 years ago
VIDEOOOOOOOOOOOO
or_ford982 years ago
VIDEOOOOOOOOOOOO
caguallo2 years ago
i bought 2 oz. of glonations blue powder and i was wondering what you would mix with it to make a paint???
pnkpanther2 years ago
I would like to agree with Jolshefsky. I just painted my bike using this guide, It was a fun expirement however I used Glow inc's supposed 24 hour glow paint which did not work nearly as well as advertised but seeing as i'm on a budget I had to use what i bought. the bike glows pretty well especially after a charge and is a cool thing to have but all in all i'd say this project really wasn't worth the effort I had to put into it. the paint also chips off pretty easily even after 3 coats of clear acrylic and gets dirty quite easily. If you're looking to do this yourself my tips would be; be extremely patient with the coats of glow paint to get them solid, and if you can take the parts to a shop or get them professionally clear coated to keep them from getting dirty and chipped.
jlaw72 years ago
I painted a bike last summer and found that using an industrial paint stripper takes all the stock paint off very easily, that is an option as opposed to sanding
jreyes202 years ago
Did you ever try sanding the paint off the frame before painting, or do you know of anyone who has? I plan on painting my bike and I'm trying to decide whether to sand then paint or just prime then paint like you did. Also, my frame is already white, so would spray painting it white be redundant?
Adobi (author)  jreyes202 years ago
I did not try sanding the frame, although it might help give the bike a cleaner look and help the spray paint stick better. However, the work it would take to sand the whole bike might outweigh the benefits of it looking better. Also, I don't think it would be too redundant to repaint the bike with a flat white gloss, I think it helps make the glow paint stick better. However, I would try painting a sample of the phosphorescent paint on the bike before you spray paint it to see if it meets your satisfaction, this way you could possibly save time and money. Hope this helps, good luck!
Has anyone heard of the Bike After Dark lights yet? they light up the whole ground when you're ridin, like Tron. pretty awesome if u ask me.
1-40 of 192Next »