Print PDF
Favorite
Email
Step 7Cutting!
I played around with several different methods for cutting the hole where the sensor will rest. Depending on your shoe, some techniques will work better than others.
What I did here was take a foam-core x-acto blade and set the blade out to 1/4" (depth of the sensor). I went inside of the shoe and scored across the midpoints of the square to determine the depth.
What I did here was take a foam-core x-acto blade and set the blade out to 1/4" (depth of the sensor). I went inside of the shoe and scored across the midpoints of the square to determine the depth.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
