Print PDF
Favorite
Email
Step 3Glue and clamp
Apply an even layer of glue on the back side of the U-shaped piece with the hole in it.
Evenly sandwich that piece together with the solid U-Shaped piece and clamp them until dry (roughly 30 minutes).
Remove the clamps and apply glue evenly along the short flat edge of the new composite U-shaped piece (this is the edge opposite the curve). Clamp this at a right angle with the "Ninja vs Zombie" cutout.
Evenly sandwich that piece together with the solid U-Shaped piece and clamp them until dry (roughly 30 minutes).
Remove the clamps and apply glue evenly along the short flat edge of the new composite U-shaped piece (this is the edge opposite the curve). Clamp this at a right angle with the "Ninja vs Zombie" cutout.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
