Print PDF
Favorite
Email
Step 2Choosing the steel
After having an experiment with some scraps at work I decided that 0.8mm and 1.0mm were too thick. 0.5mm was easier to bend by hand and I could create tighter radiuses.
I opted to buy some strips of 0.5mm stainless steel. Mine were £0.90 each for strips 500mm long and 20mm wide. I found a seller of stainless steel offcuts on ebay and sent them a message to see if they'd be interested in selling me the strips I needed.
I opted to buy some strips of 0.5mm stainless steel. Mine were £0.90 each for strips 500mm long and 20mm wide. I found a seller of stainless steel offcuts on ebay and sent them a message to see if they'd be interested in selling me the strips I needed.
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
Jun 20, 2011. 9:38 PMmysss
says:
I'd have put the shinier side inside for the (probably slight?) decrease in friction. This is an awesome idea! Now we can make whatever cookie shapes we want!!
Reply
Sep 30, 2010. 7:10 AMFIClarityJane
says:
Is there any chance you could please link me to the seller on ebay? Thanks!
Reply
45
Sep 30, 2010. 7:23 AM
Jayefuu (author)
says:
Jayefuu (author)
says:
Their ebay name was "polished-metal-offcuts".
Reply
Sep 30, 2010. 10:02 AMFIClarityJane
says:
Thank-you! :D
Reply
 |
Add Comment
|
