Print PDF
Favorite
Email
Step 6Marking helps!
As you move around the perimeter of your template, it helps to be able to draw a line on the steel every now and again so you can offer it up against the template, then move it away to a vice or better work surface to bend it.
In this photo I had bent the first leg into shape then wanted to get a tight bend. I marked the steel then threw it in a vice so I'd have more control over it.
In this photo I had bent the first leg into shape then wanted to get a tight bend. I marked the steel then threw it in a vice so I'd have more control over it.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
