Print PDF
Favorite
Email
Step 6Attach Pockets and Flaps
First, pin the pleats in the pleat pocket by folding one of the 6-in sides over and back on itself in two evenly-spaced places. (See photo for good visual detail.)
Cut four 1-inch pieces of adhesive velcro. Stick the velcro to the fabric as shown in the photo--prickly side on the flaps and soft side on the pockets. The adhesive is pretty good for helping you achieve just the placement you're looking for, but it isn't very durable. So, sew around the edges of each velcro piece. (Sew the tops and bottoms separately. )
Pin the pockets and flaps to the un-quilted 12.5 x 9 piece of aqua fabric, according to the photo. Stitching close to the edge, stitch around the sides and bottom of the small pockets, and along the top edge of the flaps.
Cut four 1-inch pieces of adhesive velcro. Stick the velcro to the fabric as shown in the photo--prickly side on the flaps and soft side on the pockets. The adhesive is pretty good for helping you achieve just the placement you're looking for, but it isn't very durable. So, sew around the edges of each velcro piece. (Sew the tops and bottoms separately. )
Pin the pockets and flaps to the un-quilted 12.5 x 9 piece of aqua fabric, according to the photo. Stitching close to the edge, stitch around the sides and bottom of the small pockets, and along the top edge of the flaps.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
