Instructables
Picture of No Sew Duct Tape iPhone Case
Inspired by the popularity of the No-Sew Duct Tape Wallet and the No-Sew Duct Tape Zipper Pouch, I decided to create a No-Sew Duct Tape iPhone Case!  Of course, you can modify this style to fit any phone, or use it for something else entirely.  This version is the simplest of them all, and a great introduction to the rest of the series!





This project is inspired by  Simply Sublime Bags by Jodi Kahn
 
Remove these adsRemove these ads by Signing Up

Step 1: Materials

Picture of Materials
For this project you need:
  • Fabric - size determined by the size of your phone, but 8x10 is a good default
  • Duct tape
  • Stapler
  • Staples
  • Scissors

Step 2: Tape fabric

Picture of Tape fabric
taped.jpg
front.jpg
trim.jpg
Begin by placing strips of duct tape along the back side of the fabric.

Slightly overlap the strips of tape. 

Peel the fabric off the table and trim off the excess tape around the edges.

Step 3: Turn Edges

Picture of Turn Edges
tapededges.jpg
fold.jpg
taped2.jpg
trim2.jpg
Place a strip of tape across the two short edges on the right side of the fabric.

Turn the fabric over so the taped side is facing up.

Fold the short edges over so and tape down so that a little bit of the fabric shows on each edge.

Trim off excess tape.

Step 4: Staple Sides

Picture of Staple Sides
staple.jpg
sidesstapled.jpg
Measure the pocket for your case by wrapping the fabric around your phone as in picture 1, making sure the fabric sides are facing each other ("right sides together").

Staple along both sides of the pouch along the full length of tape, as in pictures 2 and 3.

Step 5: Cover Staples

Picture of Cover Staples
tapestaples.jpg
foldside.jpg
rolltape.jpg
Place a piece of tape along the entire length of the sides you just stapled, making sure the fabric is facing you.

Fold the taped edges over along the staple line so you are folding back about 1/2" of the fabric, and tape down.

Either trim the edges of the tape and skip to step 7 or fold under the bottom tape to the other side, and leave the tape at the top long for an envelope finish, and proceed to step 6.

Step 6: For envelope flap

Picture of For envelope flap
rollcorner.jpg
foldcorner.jpg
corners.jpg
Fold the two edges towards the middle.

Roll the remaining tape under the flaps, so it works sort of like double sided tape. 

Press down corners to adhere.
Sapna Dadwal made it!2 years ago
I made this out of a pyjama that I din use anymore..The fabric was faded so I used fabric paint on it to make it look better...this is the first time I am posting what I made :) m gonna make several versions of these in all colors!
20120712_231147.jpg
scoochmaroo (author)  Sapna Dadwal2 years ago
Awesome! 3-mo PRO for you!
Awww...thank you so much !!
missfish15 days ago
I love this holder!!!!!!
14, 6:06 PM.jpg
Cbear043 months ago

Pretty Cool goodjob

StephanieG1 made it!3 months ago

Fantastic Idea scoochmaroo! I made a bigger version and turned it into a pencil case for school. Everyone loves it. Thank you so much!!

IMG_3239.JPG
Cute thx I will definitely try that since I have so much duct tape
twoshells made it!10 months ago
My first instructable attempted, I had to enlarge them for surface tablets. I'm quite proud and I included Velcro tabs!
14, 7:05 AM.jpg
sprekeges made it!1 year ago
I love it! I'm using it as a gift for my friends birthday!
13, 12:31 PM.jpg
rayo1521 made it!1 year ago
These are awesome, ive made so many of them! I just added a pocket inside so i can carry my cards/cash too. Thanks so much for the idea.
13 10:46 a.m..jpg13 10:46 a.m..jpg
Jessie Marie made it!1 year ago
I found your instructable, and thought it was the perfect idea for the Christmas season! So I decided to make a bunch as presents for people using peppermint fabric. They turned out really nice! :)
picccc.jpgpurse.jpg
scoochmaroo (author)  Jessie Marie1 year ago
Fantastic! 3-mo Pro coming your way!
Thanks so much!
eraserheadache made it!2 years ago
I was looking for immediate protection for my brand new iPhone 5, and this worked great! Now if I can only find a way to make one to protect it from kid drops! ;)
8016284888_d047a493e9.jpg8016285246_58119be8a8.jpg
scoochmaroo (author)  eraserheadache1 year ago
(did you get your 3-mo Pro code?)
scoochmaroo (author)  eraserheadache2 years ago
Fantastic!
I forgot to mention materials. The fabric was in a discount basket at Walmart (less than $3) and the Duct tape was at the big W. too.
funkstach made it!2 years ago
Here is my finished product! Enjoy!
Waterproof Phone Case.jpg
scoochmaroo (author)  funkstach2 years ago
Awesome! 3-mo PRO for you!
funkstach2 years ago
I just bought neoprene fabric to make a rain guard for my backpack and had plenty extra, so it was perfect to make a waterproof phone case. Plus, i have awesome mustache duck tape handy for all occasions, so i appreciate the accessibility of items needed for this project. Thanks for sharing this wonderful idea! :)
Warlrosity made it!2 years ago
Here we go! I didn't have any velcro on hand so I just used some elastic to hold it together.
Aaaa.jpg
scoochmaroo (author)  Warlrosity2 years ago
Awesome! 3-mo Pro for you!
Oh goodness! Thank you!
great project!!!!
This is too cool! Incredibly convenient for those times when the only thing you need is your phone and maybe a credit card or some cash.... no need to carry a bulky wallet or a purse!