I had built one of these years ago and then I saw a guy at the petrol station with a dodgy looking one. I thought there must be a calling for something like this so here is how to make one.

Step 1: Things You'll Need

First a list of things you will need:

Jerry can lid

19mm drill bit
1 1/2 brass nipple
2 1/2 brass nuts
1/4 turn gas tap
3/4 hose barb to thread fitting
Fuel resistant gasket sealant

Follow these steps:

Hopefully this can help you out.

very nice
<p>cheers mate!</p>
<p>Thank for sharing this awesome idea! Voted. Now I have to make one.</p>
<p>Thanks mate, I'm happy it might be of use to you.</p>
<p>Thanks for sharing how to make this. I definitely need to make one! I spill gasoline all over my shoes every time I fill up the tractor!</p>
<p>Either that or fill it up bare foot!! :P</p>

About This Instructable




Bio: I need more space for my projects, my garage is packed. I like to make things, I've always got a project on the go.
More by tom_sanremo:Run a Ryobi Tool Off DeWalt Battery Camping Light Square Tube Bender 
Add instructable to: