Print PDF
Favorite
Email
Step 3Decorating and Installation
I made a north pole sign, but most people should recognize what it is without one.
Using a recycled election sign made from coroboard I painted it white and trimmed in green. The letters I did in photoshop and cut them out to make a template to paint in. The fake greens and ribbon just got zipped tied on.
- Installing
Put a bulb in the light and hammer the rebar into the ground as far as you need. Slide the pole over the rebar and into the brackets. Plug in your lights to a 3 way connector and into your house however you can. Enjoy your handywork and have a Merry Christmas.
For more Christmas how to's try Planet Christmas
Using a recycled election sign made from coroboard I painted it white and trimmed in green. The letters I did in photoshop and cut them out to make a template to paint in. The fake greens and ribbon just got zipped tied on.
- Installing
Put a bulb in the light and hammer the rebar into the ground as far as you need. Slide the pole over the rebar and into the brackets. Plug in your lights to a 3 way connector and into your house however you can. Enjoy your handywork and have a Merry Christmas.
For more Christmas how to's try Planet Christmas
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
