Print PDF
Favorite
Email
Step 4Details and fixing
As I was gluing the corks down I tried to vary the different coloured ends randomly. Some were quite dark red and some lighter, and the white wine ones cork-coloured.
The other thing I did was made sure that each of the side corks had interesting and unique printing on them.
To fix to the wall I left each of the four corner corks inside the edge corks unglued so that I could drill a hole into the backboard and fix it to the wall. The just replace the cork in it's hole without glueing so that you can unfix it if necessary.
The other thing I did was made sure that each of the side corks had interesting and unique printing on them.
To fix to the wall I left each of the four corner corks inside the edge corks unglued so that I could drill a hole into the backboard and fix it to the wall. The just replace the cork in it's hole without glueing so that you can unfix it if necessary.
| « Previous Step | Download PDFView All Steps | Next Step » |
very clever to keep the screws accessible.
GJ!