Step 17: Mixing the Quantum
When you have the mixture just right, there are going to be big pieces of paint floating in it. Take a shop towel or something similar and place it into the top of the empty bottle like a filter. Slowly pour the mixture through the filter removing all the big chunks of paint. The liquid is now ready to be poured into the Coke bottle. I recommend using a small funnel for this.
Put the bottle on the stand and light it up. If you are happy with the color, you can glue the cap on. I do this to seal it and so no one tries to drink it! Put a thin layer of glue around the top of the bottle and pop the top on. Hold it in place for a little bit until the glue starts to set.
After that's dry, glue the Quantum label on. Make sure it is centered on the bottle. I used three rubber bands to hold the label in place and against the bottle until the glue set.