Introduction: Nuka Cola- Cherry,Quantum, Original&Victory

Picture of Nuka Cola- Cherry,Quantum,     Original&Victory

Nuka-Cola- A cool drink in the Fallout series. I've always wanted to make one, and, seeing as I'm really into Fallout at the moment, I've decided to make a few!

Step 1: What You Are Going to Need:

To make the Nuka-Cola's you will need the following:

A J20 bottle, or a Coca-Cola bottle.
Red, Blue, Black and Yellow food colouring.
Glue-stick/Hot glue
Cloth
The Labels;
Quantum- http://whatpayne.deviantart.com/gallery/#/d1rgvf9
Cherry- http://whatpayne.deviantart.com/art/Nuka-Cola-Cherry-label-109815602
Victory- http://evansy.deviantart.com/art/Nuka-Cola-Victory-Label-185837136
Original- http://whatpayne.deviantart.com/art/Fallout-Nuka-Cola-Label-105172310

Optional-
Nuka-Cola cap's label- http://weeklygeekshow.com/nukasheet.jpg
'Nuka Cola Radium' label- ONLY TO BE USED WITH PERMISSION THAT I HAVE GRANTED
Tonic water
A LED
Coke

Step 2: Preparing the Bottle

Picture of Preparing the Bottle

Start of by emptying out the contents of your bottle- So drink up!

When all the drink has gone, wash out the bottle with some water. Then, start to peel of the label. Unfortunately, when I began to do this, the label didn't come off right. So, I then washed the label with hot water, and it began to just come away. I then got a cloth a rubbed off the sticky residue. It left the bottle clean and ready to be made into a Nuka-Cola!

Step 3: Print Off the Labels

Picture of Print Off the Labels

Using the hyperlinks provided, print off the labels and the cut them out- But, remember to cut carefully as this step will make or break your Nuka-Cola's.

Step 4: Sizing Is Everything!

Picture of Sizing Is Everything!

When I was printing them off, I wanted to save some ink by placing two labels on each page- BIG MISTAKE! It made the labels too small! I did previously try a test label, but the labels didn't go around the entire circumference of the bottle. Whoops! From there, I tried to make them bigger and I then printed them off again.(in colour). This time, they labels were too big and they overlapped each other. It's just not my day is it?

So, when you're printing off the labels- CHECK THE SIZE!

Step 5: Making the Drink

Picture of Making the Drink

Ok this is the main part the drink itself. Fill up your bottle with water (Not to the top!) and add the following amounts of food colouring:

Quantum- 1-2 drops of Blue food colouring
Victory- A drop of Yellow and 1-2 drops of red food colouring
Cherry- 2-3 drops of red food colouring
Original- 1-2 drops of black food colouring OR ordinary Coke

Mix the drink.

This method will work with any Nuka-Cola. Also, if you want your drink to light up add Tonic water! It has Quinine in it, and when Quinine is lit up, it GLOWS!

Step 6: Sticking the Label On

Picture of Sticking the Label On

Get your labels and your bottles and stick them onto each bottle. Do this by adding Hot Glue/Glue-Stick glue to the labels, and then line them up so that both labels meet up. If you get some bubbles or lines on the labels, leave them there- they did go through a Nuclear Explosion!

Step 7: The Bottle Caps

OPTIONAL- make a Nuka-Cola bottle cap. I didn't do this step, but there is plenty of tutorials all around the web, so have a look round there, and you'll get what you are looking for.

Step 8: Admire Your Nuka-Cola's

When you have completed all these steps, you are done! Enjoy your cool and new Nuka-Cola's!

Can I also thank 'WhatPayne' for making the labels; they were very useful!

All rights go to Bethesda Software

Thank you for reading!

Step 9: Updates

Picture of Updates

So, I've made a couple more Nuka-Cola's, including my own type of the drink! Here they are! If you have any questions I will be happy to answer them.

Best Regards,
BigBuildFridays 

UPDATE
If you want, my 'Nuka Cola Radium' label now up for download. If it doesn't work, post acomment stating why. Also, if you do wish to use the label, inform me, and state that you did not make the label (sorry for the hubba-bub, but it's what I did when I got the other labels)

Comments

MichaelL270 (author)2016-02-22

can i have permission to use the radium label, i need it for a party

Riffifi (author)2015-11-27

i like the Nuka-Cola Radium, but i'd use a more fluorescent and translucent color... :)
and what about a "Nuka-cola Dark Matter", or a "Nuka-cola Ultraviolet"? :D

duje.vjesnica (author)Riffifi2016-01-03

yea bro

duje.vjesnica made it! (author)2016-01-03

why not just put juice instead of coloured water

Mystery9829 (author)2015-11-17

I do believe that using a different paper, like sticker paper, would hold more

BradArmstrong (author)2015-11-14

Can I make a radium, I have no purpose, just for fun. I also need the ingredients for the radium. Thank you!

TravisM18 (author)2015-11-03

Personaly If I could I would make Nuka Cola with black cherry pop with a bit of pom juice.

DominicG4 (author)2015-07-02

I tried this but the colour vanished after less than a week :( desperately trying to find a way to make the colour last.

Anyakin (author)DominicG42015-07-03

Sorry to hear that, but did you make it totally airtight? Mine are still bright to this day. I'm designing new ones for FO4, so will redo the recipe :)

Ayden Renzella made it! (author)2015-04-21

It was fun to make

Anyakin (author)2014-10-04

Sure thing coolguymr45

coolguymr45 (author)Anyakin2014-10-04

is there a link or a photo of some sort or do I just find my own on da interweb

coolguymr45 (author)2014-10-03

may I use radium, I'm getting a new bedroom and I want to make a case of these

coolguymr45 (author)2014-10-03

may I use radium, I'm getting a new bedroom and I want to make a case of these

coolguymr45 (author)2014-10-03

may I use radium, I'm getting a new bedroom and I want to make a case of these

coolguymr45 (author)2014-10-03

may I use radium, I'm getting a new bedroom and I want to make a case of these

coolguymr45 (author)2014-10-03

may I use radium, I'm getting a new bedroom and I want to make a case of these

coolguymr45 (author)2014-10-03

may I use radium, I'm getting a new bedroom and I want to make a case of these

sbarnett6 (author)2013-09-26

It's always helpful to choose a bottle with a straight side. I initially tried this on a traditional coka cola bottle but the curves it has on the side really screwed things up when trying to place the label.

Anyakin (author)2012-10-21

Err, do you want a publication, PDN or just a copy and paste picture?

Anyakin (author)2012-10-21

Hahahahah yeah, sure!

smurphy2 (author)2012-10-10

Can you add the label for your "nuka cola radium"? I really wanna make one and use it as my mouth wash bottle!

Anyakin (author)2012-04-16

Thanks!

Penolopy Bulnick (author)2012-04-15

Awesome!

About This Instructable

46,184views

141favorites

License:

Bio: I'm a keen builder, and will use anything from cardboard to PVC to build things! Hopefully I'll be making more Instructables soon...
More by Anyakin:Nuka cola- Cherry,Quantum,     Original&Victory
Add instructable to: