Step 7: Output to the TV
The output to the TV is simple yellow "video" plug. The cable to this has an inner central wire and an outer metal mesh shield wire around it.
These are connected to the Arduino 2 board as in the diagram:
Pins 8, 9 and GND are used.
The resistors have to be the same as or very close to the values shown.
These are connected to the Arduino 2 board as in the diagram:
Pins 8, 9 and GND are used.
The resistors have to be the same as or very close to the values shown.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
