Introduction: OC: Oodammo Caliber Knex Sniper Rifle

Picture of OC: Oodammo Caliber Knex Sniper Rifle

A few weeks ago I posted a forum topic about the fact that there were so many oodammo pistols. My opinion about it was that people should start posting oodammo rifles or other oodammo guns instead of only pistols. Many people disagreed and actually they were right. I shouldn't tell people what to post and what not to post. But that doesn't mean I can't post an awesome oodammo sniper Rifle:

People in the world, I present you: OC: Oodammo Caliber Sniper Rifle.
Range: 90+ feet
Magazine: 4 bullets

Non-pinching handle
foldable + automatic unfolding bipod, can also turn 360 degrees
4 bullet oodammo magazine
true trigger
ram guide

Step 1: Piece List

Picture of Piece List

dark gray connectors: 50
light gray connectors:10
orange connectors:13
red connectors:38
green connectors:19
yellow connectors:81
white connectors:28
blue connectors:40
purple connectors:0
y connectors:47
tan connectors/blue caps:5
hinges: 1pair

green rods: 202
white rods:116
blue rods:41
yellow rods:2
red rods:12
gray rods:3 (one black coloured for the ram is prefered)

special pieces:
small rubberbands: 5
Big rubberbands: as many as you like
tape (thin)
Blue spacers: 8
Gray spacers: 4

Step 2: Stock + Ram Guide

Picture of Stock + Ram Guide

you might notice it bends a little, that is good, It has a complicated reason and a complicated cause.

Step 3: Scope (optional)

Picture of Scope (optional)

in this step you'll build the scope,
This is an optional step

Step 4: Handle

Picture of Handle

In this step you'll build the handle

Step 5: Fake Barrel + Foregrip + Magazine

Picture of Fake Barrel + Foregrip + Magazine


Step 6: Bipod (optional)

Picture of Bipod (optional)

This is an optional step

Step 7: Ram

Picture of Ram

Probably the most important part of the gun

Step 8: Barrel + Trigger

Picture of Barrel + Trigger

Though many oodammo guns have 3 layers, this is a 5 layer gun.

Step 9: Assembly

Picture of Assembly

assemble the gun in this step

Step 10: Rubberbands

Picture of Rubberbands

string the rubberbands in this step.

Step 11: How to Use

Picture of How to Use

If you need help using the gun here is some.

To load a magazine:
-Pull back the ram.
-trigger sets into place automatically.
-put the pusher in first, then four oodammo bullets.
-string the little rubberbands around the pusher.

To shoot:
-pull the trigger

To shoot again:
-pull the ram back
-pull the trigger.

Step 12: Fin

Picture of Fin

have fun with the gun


Seleziona (author)2010-03-12

I built it and didn't like it.
It for sure didn't get 90+ feet :(
more like 40 feet

Mr. Muggle (author)Seleziona2010-03-12

that's right, by that time I thought a feet was 4.5 meters, it did shoot 60-70 feet when I made it. I'm sorry you didn't like it, I must admit the barrel is a bit pointless but I really liked the bipod and the mag worked very good with me...  but yeah, an oodammo sniper is a bit pointless, the idea is a bit noobish but I liked the gun.

guyknex (author)Mr. Muggle2015-03-27

a sniper that shoots oodamoo is not piontless very good idea

Seleziona (author)Mr. Muggle2010-03-12

 Ok :)

guyknex (author)Seleziona2015-03-27

um, still a good gun but i understand...

guyknex (author)2015-03-27

good gun

ryan2brian (author)2012-08-09

i need help with triger system and geting it to work with ram every thin is finish exsip fot that so plz mak a vedio or something

Timstoop (author)2011-08-03

ik heb hem gemaakt maar hij werkte niet, dus paste ik hem aan maar hij werkt nog steeds niet :(

Maar ja... maak niet uit. Ik maak morgen wel een nieuwe

erikos kostarikos (author)2011-01-18

I like the idea. :D

mickygrules (author)2010-10-04

I built it, but when you put loads of bands on it, the trigger doesn't pull, due to the amount of potential energy in the bands stopping the trigger from pulling. Other than that, GREATH GUN! :D

Mr. Muggle (author)mickygrules2010-10-08

yes, that happened to me as well, I modded it: Put tape on the trigger and mod the handle so that you can pull the trigger back really far, that should help.

Mr. Muggle (author)2010-07-31


dmytro509 (author)2010-06-11

i might buld it i just wana know what can it penetrate through and how far does it actualy shoot

Mr. Muggle (author)dmytro5092010-06-12

I think it shoots about 60 feet, I don't know what it can penetrate...

SonicX 22 (author)2010-03-22

 this gun looks awesome!

im gonna make it in the afternoon (because right now its 12:23AM i really have to go to bed XD)

mettaurlover (author)2010-02-06

You can actually hold 5 shots if you don't use a pusher but instead hook the rubberband under the last shot. Also, this can easily be compacted into a rather small package if you just remove most of the fake barrel and snub the nose.

Mr. Muggle (author)mettaurlover2010-02-07

that's right but I like the rifle

mettaurlover (author)Mr. Muggle2010-02-07

Still, I'm talking about practical war use, not looks. In the state given here, it looks great.

Mr. Muggle (author)mettaurlover2010-02-07

oh, it's not a good war gun, you should build the TR18 for a war gun

The Jamalam (author)2009-12-31

The whole reason we use pistols is that they are small, compact and that oodammo doesn't need to be rifle sized to make them fly straight. A rifle is just a waste of pieces as far as oodammo is concerned.

Mr. Muggle (author)The Jamalam2009-12-31

actuallly I agree with you but it sure looks cool and more realistic than the pistols, also this one has a stock and ram guide which adds range, and though the fake barrel is not needed it also has a hand grip and it has the magazine in it. Also this gun was meant to be a sniper and a sniper is a rifle not a pistol

The Jamalam (author)Mr. Muggle2009-12-31

The ram guide usually adds friction, it's only necessary with a lot of bands to keep the pin in place. I don't think it actually improves the range. It's a good gun, don't get me wrong :P

Mr. Muggle (author)The Jamalam2009-12-31

Ok thanks, but as you see there are lots of bands

Senior Waffleman (author)2009-12-21

step 5 pic 6 looks like an upside down smiley face

Merugop (author)Senior Waffleman2009-12-26


Senior Waffleman (author)Merugop2009-12-26


lol, you're right, I hadn't even seen that yet


cool bas3 (author)2009-12-19

the first cool looking oodammo sniper rifle 4,5*

DJ Radio (author)cool bas32009-12-21


cool bas3 (author)DJ Radio2009-12-21

wait a second.
the best oodammo fed sniper rifle!

DJ Radio (author)cool bas32009-12-21


Mr. Muggle (author)DJ Radio2009-12-21

he means this one has a magazine

DJ Radio (author)Mr. Muggle2009-12-21

In that case, it doesn't shoot 90 feet unless you hold it at an angle. 

silentassasin21 (author)DJ Radio2009-12-21

It could be possible look at all the bands he has

DJ Radio (author)silentassasin212009-12-22

But look at the pin he has as well, it has no tape on it, that pin would smash up with 7 bands on it.

Mr. Muggle (author)DJ Radio2009-12-22

of course it has tape on it, tape and some pieces for even more strength. Look in step 7.

Mr. Muggle (author)DJ Radio2009-12-22

also, there are seven bands

Mr. Muggle (author)DJ Radio2009-12-22

that's right, I shot it with an angle of about 30 degrees with the ground

cool bas3 (author)DJ Radio2009-12-21

what he said

Mr. Muggle (author)cool bas32009-12-19


cool bas3 (author)Mr. Muggle2009-12-19


Raikou-san (author)2009-12-21

Looks rushed, messy, and uncomfortable. Clean it up some, make a better handle and stock.

Of course, I can always mod, but it's nice to see the original get beefed up by its author.

Mr. Muggle (author)Raikou-san2009-12-22

I disagree with you, the handle and stock were really strong, the gun may look  a bit messy but that's because of all the bands. and I don't understand what you think is uncomfortable about it.

Raikou-san (author)Mr. Muggle2009-12-22

It looks messy because of all the blue connectors.The handle and stock might've been strong (I can't disagree with you there), but I think you should've just filled up the handle with the same connectors throughout instead of the blue connector design.

And it looks uncomfortable because of the blue connectors in the handle.

I could very well be wrong about this, seeing as I haven't built it, but I'm just going by pictures and what my mind visualizes what it will feel like.

Mr. Muggle (author)Raikou-san2009-12-22

I don't understand what you think is messy about the blue connectors, there is a reason for those. The blue connectors in the handle have a reason as well and they don't pinch your hand at all, but you'll only know this once you've actually held it. I can understand why you think these things though but when you build it I can assure you non of these things will bother you once you build it.

Raikou-san (author)Mr. Muggle2009-12-22

Probably so. I might build and test it later on today.

~KGB~ (author)2009-12-19


Mr. Muggle (author)~KGB~2009-12-19


~KGB~ (author)Mr. Muggle2009-12-20

no problem

About This Instructable




Bio: NOTE: please click on the subscribe button left above this page. It would be a good thing to do! ___________________ I am Mr. Muggle and ... More »
More by Mr. Muggle:Update!!!marble machine: Patch + more pricesLet's talk: GL10
Add instructable to: