A few weeks ago I posted a forum topic about the fact that there were so many oodammo pistols. My opinion about it was that people should start posting oodammo rifles or other oodammo guns instead of only pistols. Many people disagreed and actually they were right. I shouldn't tell people what to post and what not to post. But that doesn't mean I can't post an awesome oodammo sniper Rifle:

People in the world, I present you: OC: Oodammo Caliber Sniper Rifle.
Stats:
Range: 90+ feet
Magazine: 4 bullets

Features:
Stock
Non-pinching handle
foldable + automatic unfolding bipod, can also turn 360 degrees
4 bullet oodammo magazine
scope
true trigger
foregrip
ram guide

Step 1: Piece List

connectors:
dark gray connectors: 50
light gray connectors:10
orange connectors:13
red connectors:38
green connectors:19
yellow connectors:81
white connectors:28
blue connectors:40
purple connectors:0
y connectors:47
tan connectors/blue caps:5
hinges: 1pair

rods:
green rods: 202
white rods:116
blue rods:41
yellow rods:2
red rods:12
gray rods:3 (one black coloured for the ram is prefered)

special pieces:
small rubberbands: 5
Big rubberbands: as many as you like
tape (thin)
Blue spacers: 8
Gray spacers: 4

Step 2: Stock + Ram Guide

you might notice it bends a little, that is good, It has a complicated reason and a complicated cause.

Step 3: Scope (optional)

in this step you'll build the scope,
This is an optional step

Step 4: Handle

In this step you'll build the handle

Step 5: Fake Barrel + Foregrip + Magazine

construct...

Step 6: Bipod (optional)

This is an optional step

Step 7: Ram

Probably the most important part of the gun

Step 8: Barrel + Trigger

Though many oodammo guns have 3 layers, this is a 5 layer gun.

Step 9: Assembly

assemble the gun in this step

Step 10: Rubberbands

string the rubberbands in this step.

Step 11: How to Use

If you need help using the gun here is some.

To load a magazine:
-Pull back the ram.
-trigger sets into place automatically.
-put the pusher in first, then four oodammo bullets.
-string the little rubberbands around the pusher.

To shoot:
-pull the trigger

To shoot again:
-pull the ram back
-pull the trigger.