Introduction: OUTLETS FOR MY WORK BENCH

Picture of OUTLETS FOR MY WORK BENCH

I,M TIRED OF MAKING TOO MANY CONNECTIONS WITH MY ELECTRICAL TOOLS, IN ONE OUTLET, I ADD A MULTIPLE OUTLET,FOR THE STANLEY FOLDING WORK BENCH ,FOR RESOLVE THIS . I MAKE THIS PROJECT.


        MATERIALS:

   -  MULTIPLE OUTLET SOCKETS (4 OUTLETS).
    - PLASTICS TIES.
   -  PUNCH.
    - LIGHTER.

UNDERNEATH OF THE BENCH  I FOUND A SPACE FOR ADD THE OUTLETS,AND WITH THE HOT PUNCH  I OPEN 3 HOLES FOR THE PLASTIC TIES,I HOPE YOU CAN SEE  IN THE PICTURES, FOR BETTER EXPLANATION ,I SPENT LESS OF $10
 I WIN A LOT , SAVING TIME  AND IS EASY FOR FOLDING THE BENCH 

Comments

doo da do (author)2013-11-16

I hear ya, I win a lot. Won a pack 3 powerstrips, they work great. I think I will use my last one for this project. Great idea Charles

fredellarby (author)2013-01-10

These are great. I've got them all over my shop including a 12 outlet version on a column in the middle of everything,
That way most of my shop tools stay plugged in so I can switch from one to another without looking around for the right plug. I can only use one tool at a time so there's no problem with the curcuit.
I am going to put one on my portable stand now!

tacticalturkey (author)2013-01-07

Great Idea! I just got done mounting one to the front underside of my bench so I don't have cords across the top when I'm drilling, grinding, etc. Just be smart: I had my twin 500 watt halogen plugged into strip, then fired up the grinder--it popped the little breaker.
Shame on me for being lazy!

lime3D (author)2013-01-06

Great idea, been doing this for years.

ortho (author)2012-12-30

I hate switching between tools , it seems that I always pick up the one not pluged in or during the plugging-unplugging I end up with both tool cords in my hands and not the drop cord . With this project you put it in a convenient out of the way spot that is always with your work table.

rozurc (author)ortho2012-12-30

THIS IS GOOD FOR WORK FAST AND WHEN THE TIME COUNT THANKS FOR COMMENT

About This Instructable

6,882views

43favorites

License:

Bio: ROZURCTABLES
Add instructable to: