Introduction: OodAmmo Slingshot [Oblivitus]
This is Oblivitus' Oddamo Slingshot.... all credit to him :)
So just watch the video and that will explain everything.......
Remember to check you Oblivitus' channel: https://www.instructables.com/member/Oblivitus/
Also if your subscribing to me subscribe to him. :D
So lets get building!!!
Step 1: Barrel
This should be easy.
Remember to add in the blue and yellow rods where shown.
Remember to build *2* but only one with the rods connected then when the two have been built connect them together!
Step 2: Stock
Again just follow the notes.
You need to build *2* of these, And connect them together with blue rods.
Step 3:
You need to blue four of those band holders. You also need 6 blue spaces.
Should be easy.
Step 4: Mag
This is the part where the trigger and ammo goes.
Step 5: Trigger Mech and Holder.
This will teach you to build the trigger mech and its holder. Remember to build 2 holders. You need to build the trigger and leave it to the side untill it get's put together.
Step 6: Handle.
Do not connect the handle yet. The next step will show you how. This handle is different to the original but I chose to build it like this because it's lighter and just as strong.
Step 7: Connecting.
This step is showing you how to connect everything together.
Picture 1: Stock & Body and barrel,
Picture 2: Mag & Body,
Picture 3: Trigger & Trigget holder and Mag,
Picture 4: Butt of the stock.
Step 8: Elastic Bands.
Place the bands like this on the band holders.
Step 9: Mods
These are a few mods I came up with whilst toying with the gun making it better.
Picture 1: Stops the oodammo flicking upwards.
Picture 2: Safety catch. Slide it in and out to make it work.
Step 10: All Done!
Well done! You've got this far so go outside and have some fun! Remeber dont shoot any animals or people! I dont take any responsiblity for anything you break injure or kill,
Speacial thanks to OBLIVITUS visit his channel and drop him a comment : https://www.instructables.com/member/Oblivitus/
Thanks!