Print PDF
Favorite
Email
Step 2Assembling the framework and paper
The framework consists of two A-frames at the sides, with a top and bottom cross bar. You will probably need a diagonal brace to keep it all rigid.
Everything is held together with zipties.
The bottom cross bar is at the back and carries the roll of paper, ready to feed into the typewriter.
The top cross bar carries the paper up and over, once it has been typed on. the paper then falls away over the back out of the way.
I found it ihelpful to have a piece of string connecting the t wo front feet of the framework, passing under the typewriter, to help prevent the framework moveing around too much.
Everything is held together with zipties.
The bottom cross bar is at the back and carries the roll of paper, ready to feed into the typewriter.
The top cross bar carries the paper up and over, once it has been typed on. the paper then falls away over the back out of the way.
I found it ihelpful to have a piece of string connecting the t wo front feet of the framework, passing under the typewriter, to help prevent the framework moveing around too much.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
