Oh sew stylish - iPod control in a bag's handle

Step 2 Sewing

Arrange the four conductive pieces so that you have enough spacing on the handle. Start at the darker material (velostat), then the light-gray (zelt). Leave about 1 foot of conductive thread after sewing each pair for attaching to the Magic Dock.

Use these sewn pieces as a guide for where to cut the holes in the handle. You'll need four small holes.

Experiment with the right size holes in the fabric:
    - too small requires a hard squeeze
    - too large and the remote may turn on even when you don't press it.

Tuck the first pair into the upper handle crease.