Print PDF
Favorite
Email
Step 5Dock & Final assembly
The magic dock connector comes in 7 pieces: 3 metal and 4 plastic.
Use a needle to loop through each hole on the dock connector. It doesn't matter which thread goes to which hole.
Tie a double knot to secure the conductive thread, and leave some excess tot uck back into the tube to avoid fray thread.
Use a needle to loop through each hole on the dock connector. It doesn't matter which thread goes to which hole.
Tie a double knot to secure the conductive thread, and leave some excess tot uck back into the tube to avoid fray thread.
Before finishing the assembly, follow these pre-test and mid-test procedures.
When you're sure that everything works, apply a little glue or epoxy to the top and bottom plastic pieces.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
