Introduction: Old IPod USB Memory Stick Case

Picture of Old IPod USB Memory Stick Case

Today I am going to show you how to make a case for your USB memory stick with an old IPod broken IPod.

Step 1: Materials and Tools

Picture of Materials and Tools

You are going to need:

MATERIALS
* Broken IPod (preferably nano)
* Working USB Memory Stick

Tools
* Small Screwdriver
* Hot Glue Gun

Step 2: Disassemble Ipod

Picture of Disassemble Ipod

Pretty straight forward just get rid of all the insides....
your going to need some small screwdrivers once you get to the inside, they help with popping the side off as well.

Note: I took one of the layers out of the LCD screen to put over the plastic just for a cool mirrored effect... this is not needed but the LCD screen must be removed


Step 3: Disassemble USB Stick

Picture of Disassemble USB Stick

This might be rather tricky depending on what kind of usb stick you have but all you want is the inside part shown in the pictures below

Step 4: Glue the USB Into the Case

Picture of Glue the USB Into the Case

Take your usb guts and glue them into the bottom of the ipod through the connector hole, under some circumstances you may need to grind away some metal off the IPod to allow the usb to stick out.

Step 5: Put the IPod Back Together

Picture of Put the IPod Back Together

Pop it back on there and your done!

Comments

TSC (author)2010-02-09

good job

davej6694 (author)TSC2010-02-09

thanks for your comment! :)

TSC (author)davej66942010-02-09

I saw that you enter the dead computer contest hope you  win!!!

davej6694 (author)TSC2010-02-09

yeah that netbook would be nice :o thanks for your support i really appreciate it

TSC (author)davej66942010-02-09

How much gig  is the flash drive? :D

About This Instructable

4,852views

3favorites

License:

More by davej6694:Homemade aqua globe (Gravity Watering system for plants)The Indoor LED auto GreenhouseBlack Light Stencil tattoos
Add instructable to: